< Back ×
My Vehicle Change Vehicle
2000 Chevrolet K3500
< Back to View All
Quarter Panels
- Department
- Prices
OEM (Genuine) 2000 Chevrolet K3500 Splash Shield
PartNumber: 15686091
Product Specifications- Notes: Side, 4WD, 1 Ton
- Other Names: Splash Shield
- Item Dimensions: 26.5 x 10.1 x 0.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Splash Shield
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$39.05 MSRP:$58.93You Save: $19.88 (34%)
OEM (Genuine) 2000 Chevrolet K3500 Wheelhouse
PartNumber: 15977655
Product Specifications- Location: Driver Side
- Other Names: Wheelhouse
- Item Dimensions: 45.1 x 18.5 x 19.8 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15980467
- Part Description: 2000 Chevrolet K3500 Wheelhouse
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Splash Shield
PartNumber: 15553977
Product Specifications- Notes: Front, W/O 15000 Gvw
- Other Names: Splash Shield
- Item Dimensions: 18.5 x 6.8 x 0.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Splash Shield
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Panel Asm-Front Wheelhouse
PartNumber: 15995932Product Specifications- Location: Passenger Side
- Other Names: Wheelhouse
- Item Dimensions: 38.4 x 19.6 x 14.3 inches
- Item Weight: 20.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Panel Asm-Front Wheelhouse
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Shield-Front Wheelhouse Panel Splash
PartNumber: 15627726
Product Specifications- Notes: Front, W/15000 Gvw
- Other Names: Splash Shield
- Item Dimensions: 16.5 x 11.3 x 0.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Shield-Front Wheelhouse Panel Splash
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Shield-Front Wheelhouse Panel Splash
PartNumber: 15569496
Product Specifications- Notes: Side, 2WD, 1 Ton
- Other Names: Splash Shield
- Item Dimensions: 26.4 x 9.7 x 0.2 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Shield-Front Wheelhouse Panel Splash
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Shield, Engine
PartNumber: 15538409
Product Specifications- Notes: 6.5 Liter Diesel; 5.0 & 5.7 Liter, 4WD; 7.4 Liter
- Other Names: Splash Shield, Splash Shield Retainer
- Item Dimensions: 27.3 x 13.8 x 3.1 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15538284
- Part Description: 2000 Chevrolet K3500 Shield, Engine
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Fender Splash Shield Repair
Q: How to remove the stepside fender?
A:
You shall remove the taillamp, the pads, the fender to the brace screws, the brace to the support bolts, the fender to the support bolts, the side panel screws, the fender to the side panel screws, the fender to the front panel screws, the fender, and the fender supports to the side panel bolts.
By Bob
GM Specialist
01/11/2022Q: How to install the left wheelhouse panel?
A:
The proper way is to install the 3 wheelhouse-to-radiator support bolts and the nuts, the 2 wheelhouse-to-cowl mounting bracket bolts, the fender-to-wheelhouse bolts, the nuts, the left front tire and wheel assembly, the battery tray, and the battery.
By Bob
GM Specialist
01/11/2022Q: How to remove the rear dual-wheel fender?
A:
You shall remove the wiring connector from the side marker, the fender from the side panel bolts, the fender from the brace bolts, the wheelhouse filler panel, and the fender from the side panel.
By Bob
GM Specialist
01/11/2022Q: How to install the rear dual-wheel fender?
A:
The proper way is to install the fender to the side panel, the wheelhouse filler panel with the bolts, the fender to the brace bolts, and the wiring connector to the side marker.
By Bob
GM Specialist
01/11/2022Q: How to install the right wheelhouse panel?
A:
The proper way is to install the wheelhouse panel, the right front wheel, the air conditioning evaporator tube into the clip, the air cleaner hose bracket to the wheelhouse, the heater hoses into the clip, the battery tray, and the battery.
By Bob
GM Specialist
01/11/2022Q: How to install the wheelhouse splash shield?
A:
The proper way is to install the splash shields, the clip to retain the splash shield to the rear of the wheelhouse, and the bolt and the push pin retaining the splash shield to the wheelhouse.
By Bob
GM Specialist
01/11/2022Q: How to remove the left wheelhouse panel?
A:
You shall remove the battery tray on diesel models, the left front tire and wheel assembly, the fender from the wheelhouse bolts, the 2 bolts holding the wheelhouse to the cowl mounting brackets, the 3 wheelhouse to radiator support bolts, and the wheelhouse panel from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the right wheelhouse panel?
A:
You shall remove the battery, the battery tray, the heater hoses from the clip on the wheelhouse, the air cleaner hose bracket, the air conditioning evaporator tube from the clip, the right front tire and wheel assembly, and the wheelhouse panel.
By Bob
GM Specialist
01/11/2022Q: How to install the stepside fender?
A:
The proper way is to install the fender supports, the fender to the side panel, the brace to the support bolts, the fender to the front panel screws, the fender to the brace bolts, the side panel screws, the fender to the support screws, the brace to the support screws, the pads and the taillamp.
By Bob
GM Specialist
01/11/2022Q: How to remove the wheelhouse splash shield?
A:
You shall remove the push pin retainers retaining the splash shield to the wheelhouse, the bolt retaining the splash shield to the wheelhouse, the clip retaining the splash shield to the rear of the wheelhouse, and the splash shield from the wheelhouse.
By Bob
GM Specialist
01/11/2022See more FAQs (5)