2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for EGR Valve Repair
Q: How to install the EGR valve?
A:
The proper way is to install the new flange gasket, the linear EGR valve, the valve to flange bolts, the EGR valve harness connector, and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022
Q: How to remove the EGR valve?
A:
You shall disconnect the negative battery cable, and remove the EGR valve harness connector, the EGR valve to flange attaching bolts, the linear EGR valve, and the flange gasket.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the canister vent valve?
A:
You shall slide the vent valve onto the bracket, connect the canister vent hose, and install the electrical connector.
Q: How to install the air injection pump?
A:
You shall install the AIR pump and the AIR pump mounting bolt, and connect the AIR pump harness connector, and the AIR pump output hose to the AIR valve.
Q: How to remove the exhaust gas recirculation (EGR) tube?
A:
You shall remove the EGR pipe bracket retaining fastener, loosen the pipe fittings at both ends of the EGR pipe, and remove the EGR pipe.