< Back ×
My Vehicle Change Vehicle
2000 Chevrolet K3500
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet K3500 Inner Shaft
PartNumber: 19121908
Product Specifications- Notes: All Models; Under 7500 Gvw
- Other Names: Inner Shaft, Output Shaft, Shaft
- Item Dimensions: 7.0 x 4.6 x 4.6 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15588366, 12479219, 15801502
- Part Description: 2000 Chevrolet K3500 Inner Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$205.99 MSRP:$340.95You Save: $134.96 (40%)
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2000 Chevrolet K3500
PartNumber: 65-9361Product Specifications- Notes: with 31-3/4" (806 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 31.75"
- Length (mm): 806
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2000 Chevrolet K3500 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | All Engines
$320.39
OEM (Genuine) 2000 Chevrolet K3500 Outer Shaft
PartNumber: 26059714
Product Specifications- Notes: 4WD, 3500; All Models; Over 7500 Gvw; Left
- Location: Driver Side
- Other Names: Outer Shaft, Output Shaft
- Item Dimensions: 7.5 x 6.9 x 6.9 inches
- Item Weight: 6.90 Pounds
- Replaced by: 26058806
- Part Description: 2000 Chevrolet K3500 Outer Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$683.33 MSRP:$883.44You Save: $200.11 (23%)
OEM (Genuine) 2000 Chevrolet K3500 Inner Shaft
PartNumber: 19121909
Product Specifications- Notes: 4WD, Axle Clutch, All; All Models; Over 7500 Gvw
- Other Names: Inner Shaft, Pinion Shaft, Shaft
- Item Dimensions: 8.8 x 3.9 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15521907
- Part Description: 2000 Chevrolet K3500 Inner Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$213.29 MSRP:$353.04You Save: $139.75 (40%)
OEM (Genuine) 2000 Chevrolet K3500 Axle Shaft
PartNumber: 3977383
Product Specifications- Notes: All Models; Left Side
- Item Dimensions: 33.6 x 4.4 x 4.3 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Axle Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Outer Shaft
PartNumber: 26058813
Product Specifications- Notes: All Models; Under 7500 Gvw; Left
- Other Names: Axle Shaft, Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 8.4 x 7.8 x 10.5 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059717
- Part Description: 2000 Chevrolet K3500 Outer Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Front Wheel Drive Shaft Kit
PartNumber: 26062614
Product Specifications- Notes: 4WD, All
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 27.0 x 6.9 x 7.7 inches
- Item Weight: 28.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26055393, 26037363, 26020727
- Part Description: 2000 Chevrolet K3500 Front Wheel Drive Shaft Kit
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Front Drive Axle Inner Shaft (Rh)
PartNumber: 26058832
Product Specifications- Notes: All Models; Under 7500 Gvw; Right
- Other Names: Axle Shaft, Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 17.5 x 6.8 x 6.3 inches
- Item Weight: 9.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059713
- Part Description: 2000 Chevrolet K3500 Front Drive Axle Inner Shaft (Rh)
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Front Wheel Drive Shaft Kit
PartNumber: 26060240Product Specifications- Notes: All Models; All
- Other Names: Axle Assembly
- Item Dimensions: 27.5 x 7.2 x 7.4 inches
- Item Weight: 30.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26066389, 26048460
- Part Description: 2000 Chevrolet K3500 Front Wheel Drive Shaft Kit
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Rear Axle Shaft
PartNumber: 26010417
Product Specifications- Notes: All Models; 4WD
- Other Names: Axle Shaft
- Item Dimensions: 34.8 x 8.1 x 8.2 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Rear Axle Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Rear Axle Drive Shaft
PartNumber: 26011162
Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/10.5" Ring Gear, W/Dual Wheels
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 43.3 x 4.7 x 4.6 inches
- Item Weight: 19.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Rear Axle Drive Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Shaft, Rear Axle
PartNumber: 26020040
Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/10.5" Ring Gear, W/O Dual Wheels; All Models; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 37.6 x 4.7 x 4.5 inches
- Item Weight: 18.40 Pounds
- Part Description: 2000 Chevrolet K3500 Shaft, Rear Axle
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Axle Shaft
PartNumber: 15522068
Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/9.5" Ring Gear, 2WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 33.8 x 8.4 x 8.2 inches
- Item Weight: 23.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Axle Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Shaft, Rear Axle
PartNumber: 26020039Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/10.5" Ring Gear, W/O Dual Wheels
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 34.0 x 4.6 x 4.5 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Shaft, Rear Axle
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Rear Axle Drive Shaft
PartNumber: 26011161Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/10.5" Ring Gear, W/Dual Wheels
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 39.9 x 4.7 x 4.6 inches
- Item Weight: 19.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Rear Axle Drive Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Rear Axle Drive Shaft
PartNumber: 15521928Product Specifications- Notes: 1995-00, 3/4 & 1 Ton W/9.5" Ring Gear, 4WD; All Models; All; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 35.9 x 8.2 x 8.2 inches
- Item Weight: 26.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Rear Axle Drive Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Front Drive Axle Inner Shaft
PartNumber: 26059716
Product Specifications- Notes: 4WD, 3500; All Models; Over 7500 Gvw; Right
- Location: Passenger Side
- Other Names: Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 15.3 x 6.8 x 6.8 inches
- Item Weight: 10.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Front Drive Axle Inner Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Front Drive Axle Clutch Fork Shaft
PartNumber: 26033975
Product Specifications- Notes: All Models
- Other Names: Fork Shaft, Inner Shaft, Shaft
- Item Dimensions: 4.4 x 2.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Front Drive Axle Clutch Fork Shaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Shaft, Front Wheel Drive
PartNumber: 26056795
Product Specifications- Notes: All Models; Under 7500 Gvw
- Other Names: Axle Shaft
- Part Description: 2000 Chevrolet K3500 Shaft, Front Wheel Drive
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Axle Shafts
PartNumber: 12380993Product Specifications- Notes: All Models
- Other Names: Axle Shaft
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet K3500 Axle Shafts
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Driveshaft
PartNumber: 15048496Product Specifications- Notes: 2WD W/15, 000 Gvwr
- Part Description: 2000 Chevrolet K3500 Driveshaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Driveshaft
PartNumber: 26056797Product Specifications- Notes: All Models; Over 7500 Gvw
- Part Description: 2000 Chevrolet K3500 Driveshaft
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Driveshaft Repair
Q: How to install the propeller shaft (front axle-all except for NP8)?
A:
The proper way is to extend the propeller shaft to its full length, then compress it to about half its stroke, install the propeller shaft to the front axle, and install the retainers and bolts, the propeller shaft, retainers and bolts, and the front differential carrier shield.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for nuts to be installed into the yoke?
A:
The recommended torque is 20 N.m (26 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: How to install the two-piece propeller shaft?
A:
The proper way is to install the propeller shaft into the transmission, the center bearing support, the center bearing support bolts, the slip yoke, the retainers, and the bolts.
By Bob
GM Specialist
29/10/2022Q: How to remove the propeller shaft (front axle-all except for NP8)?
A:
You shall remove the front differential carrier shield, the bolts and the retainers from the front axle, the bolts and retainers from the transfer case, and the propeller shaft, compress the propeller shaft forward enough to disengage, and then move the propeller shaft rearward.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the propeller shaft (front axle-NP8)?
A:
The tools required include J43218 Clamp Pliers.
By Bob
GM Specialist
29/10/2022Q: How to remove the two-piece propeller shaft?
A:
You shall remove the retainer bolts, the retainers, the yoke and cross assembly, the propeller shaft, the center bearing support bolts, the center support bearing nuts and washers, the center bearing support, and the front propeller shaft.
By Bob
GM Specialist
29/10/2022Q: What should be noticed while removing the propeller shaft (three-piece)?
A:
You shall not pound on the original propeller shaft yoke ears, never pry or place any tool between a yoke and a universal joint, and shall tape the bearing cups onto the yoke to prevent the loss of bearing rollers.
By Bob
GM Specialist
29/10/2022Q: What should be noticed before removing the propeller shaft-one piece?
A:
When removing the propeller shaft, you shall not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and the universal joint.
By Bob
GM Specialist
29/10/2022Q: What should be noticed while removing the propeller shaft (front axle-NP8)?
A:
When removing the propeller shaft, you must not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and the universal joint. If the propeller shaft is removed by using such means, the injection joints may fracture and lead to premature failure of the joint.
By Bob
GM Specialist
29/10/2022See more FAQs (4)