FAQ for Door Seal Repair
Q: How to remove the sealing strip-side front door bottom auxiliary?
A:
The proper way is to open the door and remove the weatherstrip from the mounting surface.
By BobGM Specialist
01/11/2022 Q: What kind of tools will be required in the replacement of the sealing strip-side front door bottom auxiliary?
A:
The tools required include J38778 Trim Panel Remover.
By BobGM Specialist
01/11/2022 Q: How to remove the front door weatherstrip?
A:
You shall open the door, and pull the root drip molding from the pinch-weld and the windshield molding flange.
By BobGM Specialist
01/11/2022 Q: How to install the door weatherstrip?
A:
You shall push the roof drip molding over the pinch-weld, and close the door.
By BobGM Specialist
01/11/2022 Q: How to install the rear compartment lid weatherstrip?
A:
The proper way is to install the center weatherstrip assembly, firmly push the weatherstrip to the center of the upper roof flange, peel off the backing paper, and close the door.
By BobGM Specialist
01/11/2022 Q: How to remove the rear door weatherstrip?
A:
You shall open the door, and remove the weatherstrip from the mounting surface.
By BobGM Specialist
01/11/2022 Q: How to install the front door weatherstrip?
A:
The proper way is to push the root drip molding over the pinch-weld, and close the door.
By BobGM Specialist
01/11/2022 Q: How to remove the side door opening weatherstrip?
A:
The proper way is to open the door and pull the weatherstrip from the door pinch-weld flange.
By BobGM Specialist
01/11/2022 Q: How to install the side door opening weatherstrip?
A:
You shall position the preformed corner of the weatherstrip in the upper rear corner of the door opening, push the weatherstrip onto the flange starting at the preformed corner, continue pushing the weatherstrip onto the flange around the entire edge of the door opening, and close the door.
By BobGM Specialist
01/11/2022 Q: How to install the rear door weatherstrip?
A:
The proper way is to peel off the backing paper, press the retainers into place, install the weatherstrip to the mounting surface, and close the door.
By BobGM Specialist
01/11/2022 See more FAQs (8)