Part Description: 2000 Chevrolet K3500 Rear Side Door Latch Assembly
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Door Lock Actuator Repair
Q: How to remove the power door lock actuator?
A:
You shall remove the door trim panel, the door water deflector, and the door lock actuator, and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022
Q: How to remove the door lock actuator?
A:
You shall remove the trim panel, the water deflector, the access hole cover, and the actuator lock control rod, disconnect the actuator wiring connector, and remove the actuator from the door.
By Bob
GM Specialist
01/11/2022
Q: How to install the door lock actuator?
A:
The proper way is to install the actuator to the door and the actuator lock control rod, connect the actuator wiring connector and install the water deflector, the trim panel, and the access hole cover.
By Bob
GM Specialist
01/11/2022
Q: How to install the power door lock actuator?
A:
The proper way is to connect the electrical connector and install the door lock actuator, the door water deflector, and the door trim panel.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the door hinge roller pin?
A:
You shall remove the Door Hinge spring, the C-clips that retain the door hinge roller pins, the door hinge roller pins from the vehicle, and the old bushings.
Q: How to remove the door switch?
A:
You shall locate the Door Jamb Switch, squeeze together the tangs of the switch, push the switch through the side of the instrument panel, disconnect the door jamb switch electrical connector of the door jamb switch, and remove the door jamb switch from the vehicle.
Q: How to install the door lock switch?
A:
The proper way is to install the power Door Lock Switch, connect the power door lock switch wiring connector, and install the power accessory switch plate.