Part Description: 2000 Chevrolet K3500 Shroud-Radiator Fan Lower
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Cooling Fan Shroud Repair
Q: How to remove the lower fan shroud?
A:
The proper way is to install the lower fan shroud and the lower fan shroud bolts, the front differential carrier shield (if equipped), and the upper fan shroud.
By Bob
GM Specialist
01/11/2022
Q: How to install the upper fan shroud?
A:
You shall install the upper fan shroud and upper fan shroud bolts, and connect the battery negative cable (dual batteries only).
By Bob
GM Specialist
01/11/2022
Q: How to remove the upper fan shroud?
A:
The proper way is to disconnect the battery negative cable (dual batteries only), remove the upper fan shroud bolts and the upper fan shroud, and inspect the upper fan shroud for signs of damage. If necessary, you shall replace the upper fan shroud.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the water pump?
A:
You shall remove the upper fan shroud, the drive belt, the fan, the fan clutch, the pulley, the Water Pump bolts, and the coolant pump from the engine block.
Q: How to remove the oil cooler?
A:
You shall remove the grill, the hose clip bolt, the cooler line flair nuts from the Engine Oil Cooler, the cooler lines from the engine oil cooler, and the engine oil cooler from the mounting brackets.
Q: How to install the thermostat?
A:
You need to install the Thermostat, the gasket, and the coolant outlet, refill the coolant to the cooling system, start the engine, and install the radiator cap to the radiator.