Part Description: 2000 Chevrolet K3500 Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2000 Chevrolet K3500 | All Trims | 8 Cyl 5.7L
2000 Chevrolet K3500 | All Trims | 8 Cyl 6.5L
2000 Chevrolet K3500 | All Trims | 8 Cyl 7.4L
Show More
FAQ for Coolant Temperature Sensors Repair
Q: How to remove the coolant temperature sensor/switch?
A:
You shall relieve the cooling system pressure, drain the cooling system below the level of the Engine Coolant Temperature (ECT) sensor, disconnect the ECT sensor harness connector, and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
Q: How to install the coolant temperature sensor/switch?
A:
The proper way is to install the ECT sensor, connect the ECT sensor harness connector, refill the cooling system, and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the water pump?
A:
You shall remove the upper fan shroud, the drive belt, the fan, the fan clutch, the pulley, the Water Pump bolts, and the coolant pump from the engine block.
Q: How to remove the oil cooler?
A:
You shall remove the grill, the hose clip bolt, the cooler line flair nuts from the Engine Oil Cooler, the cooler lines from the engine oil cooler, and the engine oil cooler from the mounting brackets.
Q: How to install the thermostat?
A:
You need to install the Thermostat, the gasket, and the coolant outlet, refill the coolant to the cooling system, start the engine, and install the radiator cap to the radiator.