< Back ×
My Vehicle Change Vehicle
2000 Chevrolet K3500
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2000 Chevrolet K3500
PartNumber: 130.66031Product Specifications- UPC: 805890009900
- Part Description: 2000 Chevrolet K3500 Premium Brake Master Cylinder
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | All Engines
$59.08
OEM (Genuine) 2000 Chevrolet K3500 Master Cylinder
PartNumber: 15727261
Product Specifications- Notes: All Models; 5.0l, 5.7l, 6.5l
- Other Names: Master Cylinder
- Item Dimensions: 24.9 x 5.1 x 5.0 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15740931
- Part Description: 2000 Chevrolet K3500 Master Cylinder
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Master Cylinder
PartNumber: 94665744
Product Specifications- Notes: All Models; 7.4l
- Other Names: Master Cylinder
- Item Dimensions: 21.7 x 5.5 x 3.5 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12577230, 15049053, 15740930
- Part Description: 2000 Chevrolet K3500 Master Cylinder
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 7.4 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2000 Chevrolet K3500
PartNumber: 10-2535Product Specifications- Notes: Supplied w/Reservoir
- Bore Diameter (N): 1.25"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: Yes
- Reservoir Material: Plastic
- Reservoir Type: Assembled
- Secondary Port Size: 9/16 x 18
- UPC: 082617143028
- Part Description: 2000 Chevrolet K3500 Remanufactured Master Cylinder
Vehicle Fitment- 2000 Chevrolet K3500 | All Trims | All Engines
OEM (Genuine) 2000 Chevrolet K3500 Cylinder Asm, Brake Master
PartNumber: 19209222
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.3 x 7.5 x 9.3 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18021275, 18029968
- Part Description: 2000 Chevrolet K3500 Cylinder Asm, Brake Master
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 2000 Chevrolet K3500 Cylinder Asm, Brake Master
PartNumber: 19209223Product Specifications- Notes: All Models; 3500 Series
- Other Names: Master Cylinder
- Item Dimensions: 9.5 x 9.2 x 8.3 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18021277, 18029969
- Part Description: 2000 Chevrolet K3500 Cylinder Asm, Brake Master
Vehicle Fitment- 2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Brake Master Cylinder Repair
Q: How to install the master cylinder (vacuum booster)?
A:
You shall install the master cylinder and bracket, and the master cylinder nuts, connect the brake pipes, bleed the brakes, and release the parking brake.
By Bob
GM Specialist
01/11/2022Q: What should be noted when disassembling the master cylinder?
A:
If air pressure is used to remove the secondary piston, you shall place the open end of the cylinder bore approximately 25 mm (1 inch) from a padded workbench or other surfaces to catch the piston when it comes out of the bore.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while filling the master cylinder reservoir?
A:
You must not use fluid that has a petroleum base, must not use a container that has been used for petroleum-based fluids, or is wet with water.
By Bob
GM Specialist
01/11/2022Q: How to bleed the master cylinder bench?
A:
The proper way is to plug the outlet ports, mount the master cylinder in a vise, fill the master cylinder reservoir with clean brake fluid, stroke the primary piston about 25 mm (1 inch) several times, stroke the primary piston about 25 mm (1 inch) several times again, level the master cylinder in the vise, push the piston into the bore and fill the master cylinder reservoir with clean brake fluid.
By Bob
GM Specialist
01/11/2022Q: How to install the master cylinder (hydraulic booster)?
A:
You shall install the master cylinder and bracket, and the master cylinder nuts, connect the brake pipes, bleed the brakes, and release the parking brake.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder (vacuum booster)?
A:
The proper way is to apply the park brake, disconnect the brake pipes, plug the pipes to prevent brake fluid loss or contamination, and remove the master cylinder nuts, the bracket, and the master cylinder.
By Bob
GM Specialist
01/11/2022Q: What should be noted when disassembling the master cylinder?
A:
You must not hone the master cylinder bore. When the brake master cylinder is overhauled, it is recommended that the cylinder body be replaced rather than cleaned up by honing the bore.
By Bob
GM Specialist
01/11/2022Q: How to fill the master cylinder reservoir?
A:
The proper way is to remove the cover and the diaphragm and add brake fluid to fill the reservoirs to the full mark.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder (hydraulic booster)?
A:
The proper way is to apply the park brake, disconnect the brake pipes, plug the pipes to prevent brake fluid loss or contamination, and remove the master cylinder nuts, the bracket, and the master cylinder.
By Bob
GM Specialist
01/11/2022See more FAQs (4)