Part Description: 2000 Chevrolet K3500 Electronic Brake Control Module Kit
More Info
Vehicle Fitment
2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
FAQ for Abs Control Module Repair
Q: How to remove the electronic brake control module?
A:
You shall disconnect the Negative Battery Cable, remove the four T-25 Torx screws, partially remove the EBCM from the BPMV, disconnect the four electrical connectors from EBCM, and fully remove the EBCM from the BPMV.
By Bob
GM Specialist
01/11/2022
Q: How to install the electronic brake control module?
A:
The proper way is to install EBCM onto the BPMV, connect the four electrical connectors to the EBCM, install the four new T-25 Torx screws, connect the negative battery cable, and return to A Diagnostic System Check.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the parking brake shoe?
A:
The proper way is to connect the shoe kits and the springs and install the support plate, the shoe kits, the index lever between the shoes, the washers, and the drum.
Q: How to remove the front wheel speed sensor bracket?
A:
You shall remove the tire and wheel, the hub and rotor, the wheel speed sensor from the mounting bracket, and the wheel speed sensor mounting bracket.