< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 2000 Chevrolet Blazer
PartNumber: 20-8741Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;without Aftermarket Filtration Improvement;In-Line filter available;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 2000 Chevrolet Blazer Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$64.41
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2000 Chevrolet Blazer
PartNumber: 20-658Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2000 Chevrolet Blazer Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$44.88
OEM (Genuine) 2000 Chevrolet Blazer Pump, P/S
PartNumber: 88963508
Product Specifications- Notes: 2WD; 4WD; S-Series; 4.3l; S-Series
- Other Names: Power Steering Pump
- Item Dimensions: 9.8 x 7.5 x 11.1 inches
- Item Weight: 11.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15135010, 15066473
- Part Description: 2000 Chevrolet Blazer Pump, P/S
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Power Steering Pump Repair
Q: What is the recommended torque for the connector and fitting assembly/
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the connector and fitting assembly?
A:
It is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What tools are required during the procedure?
A:
You need to prepare a J 25034-C Power Steering Pump Pulley Remover, and a J 25033-C Power Steering Pump Pulley Installer.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Steering Pump Flow Control Valve?
A:
You need to install the flow control spring to the pump housing assembly, then you need to install the control valve assembly to the flow control spring. After that, you need to lubricate the O-ring seal with power steering fluid, and you also need to install the O-ring seal. Finally, you need to install the connector and fitting assembly to the pump housing.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump rear mounting bracket nut?
A:
The recommended torque is 41 Nm (31 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What do I need to ensure when installing the power steering pump pulley?
A:
You need to ensure that the power steering pump pulley is flush against the power steering pump shaft, with an allowable variance of 0.25 mm (0.010 inches).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the filler neck tube mounting bolt?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump mounting bracket retaining nut?
A:
The recommended torque is 41 Nm (31 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump mounting bracket mounting bolts and nuts?
A:
The recommended torque is 41 Nm (30 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump front mounting bolts?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (8)