Notes: S-Series, Syclone, Typhoon; 2WD; Pick-Up; W/O Crew Cab; Long Bed
Other Names: Intermediate Cable
Item Dimensions: 12.9 x 4.7 x 4.3 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Replaces: 15714663
Part Description: 2000 Chevrolet Blazer Cable Asm-Parking Brake Intermediate
More Info
Vehicle Fitment
2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme | 6 Cyl 4.3 L GAS
FAQ for Parking Brake Cable Repair
Q: How to remove the Park Brake Cable Mounting Bracket?
A:
You need to release the parking brake first if applied. Then you need to raise the vehicle and remove the park brake equalizer, and you can use the J37043 to collapse the locking tabs on the park brake cable. After that, you need to remove the park brake cable from the mounting bracket and remove the cable mounting bolts for the mounting bracket. Finally, you can remove the park brake cable mounting bracket.
By Bob
GM Specialist
02/11/2022
Q: How to install the Park Brake Cable Equalizer?
A:
You need to install the park brake cable in the equalizer and install the park brake cable in the connector. Then you need to install the right rear park brake cable in the equalizer and install the equalizer spring. After that, you need to adjust the parking brake. Finally, you need to lower the vehicle.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the mounting bracket bolt?
A:
It is 17 Nm (12.6 ft. lbs.).
By Bob
GM Specialist
02/11/2022
Q: How to install Park Brake Cable?
A:
You need to install the park brake cable frame retainers, and you need to install the park brake cable in the rear axle housing retainers if removed. Then you need to install the park brake cable in the brake caliper bracket, the park brake cable on the park brake actuator, and you also need to install the park brake cable on the equalizer. After that, you need to install the park brake cable in the connector and adjust the parking brake. Finally, you need to lower the vehicle.
By Bob
GM Specialist
02/11/2022
Q: Which tool is required during the Park Brake Cable Replacement?
A:
You need to prepare a J37043 Park Brake Cable Release Tool.
By Bob
GM Specialist
02/11/2022
Q: How to remove the Park Brake Cable?
A:
You need to release the park brake if applied. Then you need to remove the left trim panel knee bolster and raise the vehicle, and you also need to loosen the park brake cable at the equalizer. After that, you need to remove the front park brake cable from the connector and remove the retainer and the grommet. Finally, you need to remove the front brake cable from the park brake pedal, then you can remove the front park brake cable.
By Bob
GM Specialist
02/11/2022
Q: Which tool is required during the Park Brake Cable Equalizer Replacement?
A:
You need to prepare the J37043 Park Brake Cable Release Tool.
By Bob
GM Specialist
02/11/2022
See more FAQs (2)
FAQ for Other Repair Info
Q: How to remove the Brake Backing Plate?
A:
You need to raise the vehicle and remove the tire and wheel assembly first. Then you need to remove the brake drum, the brake shoes, the wheel cylinder, and the axle shaft sequentially. After that, you need to remove the backing plate bolts, then you can remove the backing plate.