FAQ for Liftgates Repair
Q: How to install the Lift Gate Window Weatherstrip?
A:
You need to open the liftgate window. Then you need to push the weatherstrip onto the pinch-weld flange. Finally, you need to completely seat the weatherstrip around the liftgate window opening.
By BobGM Specialist
01/11/2022 Q: How to remove the Lift Gate Window Weatherstrip?
A:
You need to open the liftgate window, and you need to firmly grip the weatherstrip, then you can pull the weatherstrip.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the screws that retain the endgate trim panel to the endgate?
A:
The recommended torque is 1.9 N.m (17 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the screw that retains the endgate trim panel to the endgate window latch support?
A:
The recommended torque is 1.9 N.m (17 lb in).
By BobGM Specialist
01/11/2022 Q: How to install the Trim Panel?
A:
You need to install the endgate trim panel to the endgate, and you need to install the screws that retain the endgate trim panel to the endgate. Then you need to install the screw that retains the endgate trim panel to the endgate window latch support. Finally, you need to install the endgate inside handle to the endgate.
By BobGM Specialist
01/11/2022 Q: How to remove the Trim Panel?
A:
You need to open the endgate and remove the screws that retain the inside handle to the endgate. Then you need to remove the endgate inside handle from the endgate and remove the screw that retains the endgate trim panel to the endgate window latch support. After that, you need to remove the screws that retain the endgate trim panel to the endgate. Finally, you need to remove the endgate trim panel from the endgate.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the crew retaining the liftgate trim panel to the liftgate window latch support?
A:
The recommended torque is 1.9 N.m (17 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the endgate inside handle to the endgate?
A:
The recommended torque is 2.8 N.m (25 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the screw that retains the liftgate assist handle to the liftgate trim panel?
A:
The recommended torque is 1.9 N.m (17 lb in).
By BobGM Specialist
01/11/2022 Q: How to remove the liftgate assist handle from the liftgate trim panel?
A:
You can carefully pry at the edge of the liftgate assist handle to remove the liftgate assist handle from the liftgate trim panel.
By BobGM Specialist
01/11/2022 See more FAQs (5)