< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Lift Supports
- Department
- Brands
- Prices
StrongArm® Liftgate Lift Support for 2000 Chevrolet Blazer
PartNumber: 4287Product Specifications- Notes: with Liftgate
- Body: 22.00
- BODY CONNECTION: ball socket (nylon) 10mm
- Brackets: No
- Compressed Length: 15.23
- Extended Length: 22.93
- Force: 152.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 10.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 7.70
- UPC: 043645695286
- Part Description: 2000 Chevrolet Blazer Liftgate Lift Support
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$11.91
OEM (Genuine) 2000 Chevrolet Blazer Strut Asm-End Gate Window
PartNumber: 15708521
Product Specifications- Notes: Window Support, 4 Door
- Location: Driver Side; Passenger Side
- Other Names: Strut
- Item Dimensions: 22.5 x 1.3 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Strut Asm-End Gate Window
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Strut Asm-Lift Gate <Use 1C6L
PartNumber: 15003615
Product Specifications- Location: Driver Side
- Other Names: Support Strut
- Item Dimensions: 27.0 x 2.1 x 1.1 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15149359
- Part Description: 2000 Chevrolet Blazer Strut Asm-Lift Gate <Use 1C6L
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Strut-Lift Gate <Use 1C6L
PartNumber: 15003616
Product Specifications- Location: Passenger Side
- Other Names: Support Strut
- Item Dimensions: 27.2 x 2.4 x 1.1 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15149360
- Part Description: 2000 Chevrolet Blazer Strut-Lift Gate <Use 1C6L
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Liftgate Lift Support Repair
Q: How to install the Support Cable?
A:
You need to install the endgate supports to the vehicle, and install the bolts that retain the endgate supports to the endgate. Finally, you need to close the endgate.
By Bob
GM Specialist
01/11/2022Q: How to remove the Support Cable?
A:
You need to safely support the endgate in the open position and remove the bolts that retain the endgate supports to the endgate. Finally, you need to remove the endgate supports from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the Strut?
A:
You need to position the liftgate struts to the liftgate and install the upper end of the liftgate struts to the ball joint. Then you need to install the lower end of the liftgate struts to the ball joint. After that, you need to remove the support from the liftgate. Finally, you need to close the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts that retain the endgate supports to the endgate?
A:
The recommended torque is 3 N.m (25 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Strut?
A:
You need to open and support the liftgate and lift up the retainer clips on the liftgate struts using a small flat-bladed tool. Then you need to remove the upper end of the liftgate struts from the ball joint. After that, you need to remove the lower end of the liftgate struts from the ball joint. Finally, you need to remove the liftgate struts from the liftgate.
By Bob
GM Specialist
01/11/2022