< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Rocker Panels & Floors
- Department
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Panel Asm, Floor Rear
PartNumber: 12546343
Product Specifications- Notes: 4 Door
- Other Names: Rear Floor Pan
- Item Dimensions: 64.8 x 57.7 x 8.4 inches
- Item Weight: 65.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Panel Asm, Floor Rear
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Panel Asm, Floor Front
PartNumber: 12546623
Product Specifications- Notes: 2 Door
- Other Names: Floor Pan
- Item Dimensions: 61.3 x 56.1 x 17.0 inches
- Item Weight: 78.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Panel Asm, Floor Front
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Panel Asm, Floor Front
PartNumber: 12546622
Product Specifications- Notes: 4 Door
- Other Names: Floor Pan Assembly
- Item Weight: 77.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Panel Asm, Floor Front
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
OEM (Genuine) 2000 Chevrolet Blazer Floor Pan
PartNumber: 12546618Product Specifications- Notes: 2 Door
- Part Description: 2000 Chevrolet Blazer Floor Pan
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Floor Pan Repair
Q: What is the recommended torque for the bolts that retain the cargo tie-down hooks to the floor?
A:
It is 35 N.m (26 lb-ft).
By Bob
GM Specialist
29/10/2022Q: Which tool is required during the procedure?
A:
You need to prepare a J 38778 Door Trim Pad and Garnish Clip Remover.
By Bob
GM Specialist
29/10/2022Q: How to remove the Rear Panel Carpet?
A:
You need to remove the rear window garnish molding, and the jack storage cover. Then you need to release the rear carpet panel retainers. Finally, you can remove the rear inner panel carpet from the vehicle.
By Bob
GM Specialist
29/10/2022Q: How to dry the floor carpet?
A:
You need to use a wet vacuum to remove the excess moisture if you observe puddles of liquid on the carpet face. Then you should Blot the face of the carpet with a towel to absorb as much moisture as possible. Finally, you need to point a fan at the affected area and air-dry the carpet.
By Bob
GM Specialist
29/10/2022Q: How to remove the rear carpet?
A:
You need to remove the rear seat floor filler trim panels, and the body side trim panels, as necessary. Then you need to remove the jack and the endgate or the liftgate door sill trim plate. After that, you need to remove the bolts that retain the cargo tie-down hooks to the floor and remove the cargo tie-down hooks. Finally, you can remove the rear carpet or the mat from the vehicle.
By Bob
GM Specialist
29/10/2022Q: How to remove the mat or the carpet?
A:
You need to remove the front seat, the jack cover, and the jack first. Then you should remove the door sill trim plates, and you also need to remove the floor console or cup holder, if equipped. After that, you need to remove the body side trim panels, and if your vehicles are with an extended cab with the rear side door, you also need to remove the C-pillar trim panel. Finally, you need to remove the body hinge trim panels, then you can remove the carpet or the mat from the vehicle.
By Bob
GM Specialist
29/10/2022Q: What types of odors can be reduced or removed?
A:
The product can remove objectionable smells of mold and mildew resulting from vehicle water leaks. It can also reduce customer-created odors, such as smoke.
By Bob
GM Specialist
29/10/2022Q: Should we use this product as an air freshener?
A:
No, it leaves no residual scent and we shouldn't use the product as an air freshener.
By Bob
GM Specialist
29/10/2022Q: How to remove the Front Floor Mat/Carpet, if my vehicle is not a 4-door model?
A:
You need to remove the front and the rear seats, and you also need to remove the rear seat belt buckles from the floor. Then you need to remove the door sill trim plates, and the body side trim panels. After that, you need to remove the floor console or cup holder, if equipped, and you should also remove the body hinge pillar trim panels. Finally, you can remove the carpet or mat from the vehicle.
By Bob
GM Specialist
29/10/2022See more FAQs (4)