< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2000 Chevrolet Blazer Timing Cover Front Seal
PartNumber: 10128316
Product Specifications- Notes: All; S-Series
- Item Dimensions: 3.0 x 3.0 x 0.6 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2000 Chevrolet Blazer Timing Cover Front Seal
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$19.94 MSRP:$37.60You Save: $17.66 (47%)
Victor Reinz® Rear Improved Design Crankshaft Seal for 2000 Chevrolet Blazer
PartNumber: 19-10067-01Product Specifications- Notes: Improved Design;1 Piece;PTFE; Rear
- Material: PTFE
- UPC: 023913756024
- Part Description: 2000 Chevrolet Blazer Rear Improved Design Crankshaft Seal
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$29.60
SKF® Rear Crankshaft Seal for 2000 Chevrolet Blazer
PartNumber: 37504Product Specifications- Quantity Per Application: 1
- UPC: 085311298872
- Part Description: 2000 Chevrolet Blazer Rear Crankshaft Seal
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
$10.23
OEM (Genuine) 2000 Chevrolet Blazer Rear Main Seal
PartNumber: 89018163
Product Specifications- Notes: S-Series
- Other Names: Rear Main Seal
- Item Dimensions: 5.1 x 5.2 x 1.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12555769
- Part Description: 2000 Chevrolet Blazer Rear Main Seal
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$26.53 MSRP:$42.15You Save: $15.62 (38%)
FAQ for Crankshaft Seal Repair
Q: How to remove the Crankshaft Rear Oil Seal Housing?
A:
You need to remove the oil pan, and the engine flywheel, and you also need to remove the bolts and the nut holding the crankshaft rear oil seal housing to the engine. Then you need to remove the crankshaft rear oil seal housing and remove and discard the crankshaft rear oil seal housing gasket. After that, you need to clean all the sealing surfaces. Finally, you should inspect and replace the crankshaft rear oil seal housing for warping, cracks, wear, or damage.
By Bob
GM Specialist
29/10/2022Q: Where do we need to inspect when we remove the crankshaft front oil seal?
A:
We need to inspect the engine front cover seal bore for damage and the crankshaft balancer seal area.
By Bob
GM Specialist
29/10/2022Q: What tools do we need to prepare if we want to install the crankshaft front oil seal?
A:
You need to prepare J 35468 Crankshaft Aligner/Seal Installer.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the crankshaft rear oil seal housing bolts and nuts?
A:
It is 12 Nm (106-inch lbs.).
By Bob
GM Specialist
29/10/2022Q: Why do we need to inspect the crankshaft front oil seal?
A:
We inspect to ensure the crankshaft front oil seal is flush and square to the engine front cover.
By Bob
GM Specialist
29/10/2022Q: What is the engine front cover made of?
A:
It is a plastic composition.
By Bob
GM Specialist
29/10/2022See more FAQs (1)