< Back ×
My Vehicle Change Vehicle
2000 Chevrolet Blazer
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2000 Chevrolet Blazer
PartNumber: 130.66037Product Specifications- UPC: 805890009962
- Part Description: 2000 Chevrolet Blazer Premium Brake Master Cylinder
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$55.04
Centric® Premium Brake Master Cylinder for 2000 Chevrolet Blazer
PartNumber: 130.66043Product Specifications- UPC: 805890123828
- Part Description: 2000 Chevrolet Blazer Premium Brake Master Cylinder
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
$61.63
OEM (Genuine) 2000 Chevrolet Blazer Cylinder, Clutch Master
PartNumber: 15051973
Product Specifications- Notes: S-Series; 4.3l; Blazer, Jimmy
- Other Names: Master Cylinder
- Item Dimensions: 4.0 x 16.9 x 16.6 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15733571, 15153421
- Part Description: 2000 Chevrolet Blazer Cylinder, Clutch Master
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2000 Chevrolet Blazer
PartNumber: 10-2866Product Specifications- Notes: Please refer to Position 11 in the Vehicle Identification Number for identifying the Production Plant;Left Hand Drive;Moraine Plant Built;Eleventh Digit of VIN is 2;Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 9/16 x 18
- UPC: 082617501576
- Part Description: 2000 Chevrolet Blazer Remanufactured Master Cylinder
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
OEM (Genuine) 2000 Chevrolet Blazer Cylinder Asm, Brake Master
PartNumber: 19209269
Product Specifications- Notes: S-Series
- Other Names: Master Cylinder
- Item Dimensions: 9.8 x 7.6 x 9.4 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18060793, 18042802
- Part Description: 2000 Chevrolet Blazer Cylinder Asm, Brake Master
Vehicle Fitment- 2000 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2000 Chevrolet Blazer
PartNumber: 10-2958Product Specifications- Notes: Eleventh Digit of VIN is K;Linden Plant Built;Left Hand Drive;Please refer to Position 11 in the Vehicle Identification Number for identifying the Production Plant;Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617589062
- Part Description: 2000 Chevrolet Blazer Remanufactured Master Cylinder
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
Cardone Reman® Remanufactured Master Cylinder for 2000 Chevrolet Blazer
PartNumber: 10-90572Product Specifications- Notes: Right Hand Drive;Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Cast Iron
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 9/16 x 18
- UPC: 082617957342
- Part Description: 2000 Chevrolet Blazer Remanufactured Master Cylinder
Vehicle Fitment- 2000 Chevrolet Blazer | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What should I do if the brake fluid is to be added to the master cylinder reservoir?
A:
You need to clean the outside of the reservoir on and around the reservoir cap before removing the cap and diaphragm, then use recommended fluid to fill the reservoir.
By Bob
GM Specialist
01/11/2022Q: What should I notice during the assembly procedure?
A:
You should ensure that you don't use abrasives to clean the brake master cylinder bore.
By Bob
GM Specialist
01/11/2022Q: When should I replace the components?
A:
If cuts, cracks, nicks, or deformation are present, you need to replace the affected components.
By Bob
GM Specialist
01/11/2022Q: What are the recommended fluids when adding fluid to the brake master cylinder reservoir?
A:
They are Delco Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: Under what circumstances should inspect the brake system?
A:
If the brake fluid level is at or below the half-full point during routine fluid checks, the brake system should be inspected for wear and possible brake fluid leaks.
By Bob
GM Specialist
01/11/2022Q: What lubrications can I use to lubricate the components?
A:
You can use Delco Supreme 11 GM P/N 12377967, Canadian P/N 992667, or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What should I use to lubricate the components?
A:
You need to lubricate them with Delco, Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: How to remove the Brake Master Cylinder Reservoir?
A:
You need to remove the master cylinder from the vehicle and secure the master cylinder in a vise. Then you need to carefully remove the brake master cylinder reservoir retaining pins. After that, you can remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder. Finally, you need to remove the seals from the master cylinder.
By Bob
GM Specialist
01/11/2022Q: What should I notice when adding fluid to the brake master cylinder reservoir?
A:
You need to notice that you use only Delco Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: When should I replace the master cylinder?
A:
If any cracks, scoring, pitting, and/or corrosion exist, you need to replace them.
By Bob
GM Specialist
01/11/2022See more FAQs (9)