Notes: There are two different designs used on the vehicle; both are interchangeable. However one unit produced by SMI utilizes a hollow rack gear that can be bent in a low-impact front end collision. This will cause binding in the steering system. Refer to instruction sheet 655630. Note: Cores w/bent rack gears cannot be salvaged.
UPC: 884109776437
Part Description: 1999 Volvo V70 Remanufactured Rack and Pinion Assembly
Notes: Includes Inner Tie Rods;In-Line filter available;Eleventh Digit of VIN is 1;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;with Hydraulic Power
Casting Material: Steel/Aluminum
Distance Between Mounting Holes (in): 20.063"
Hose Port Type: O-Ring
Import or Domestic: Import
Input Shaft Diameter (in): 0.661"
Input Shaft Length (in): 3.065"
Number of Mounting Holes: 5
Pressure Port Thread Size: M16 x 1.5
Rack Length (in): 44.000"
Return Port Thread Size: M18 x 1.5
Steering Rack Finish: Black
Thread Length (in): 2.040"
Total Turns Lock to Lock: 3.19
Type: Complete Unit
Part Description: 1999 Volvo V70 Remanufactured Hydraulic Power Rack and Pinion Complete Unit
Notes: with Hydraulic Power;Includes Inner Tie Rods;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Casting Material: Steel/Aluminum
Distance Between Mounting Holes (in): 20.063"
Hose Port Type: O-Ring
Import or Domestic: Import
Input Shaft Diameter (in): 0.748"
Input Shaft Length (in): 2.937"
Number of Mounting Holes: 3
Pressure Port Thread Size: M16 x 1.5
Rack Length (in): 44.063"
Return Port Thread Size: M18 x 1.5
Steering Rack Finish: Black
Thread Length (in): 2.301"
Total Turns Lock to Lock: 2.94
Type: Complete Unit
Part Description: 1999 Volvo V70 Remanufactured Hydraulic Power Steering Rack And Pinion Assembly