< Back ×
My Vehicle Change Vehicle
1996 Ford Ranger
< Back to View All
Driveline, Axles & 4WD
- Department
- Greasable
- Location
- Brands
- Prices
OEM (Genuine) 1996 Ford Ranger U-Joint Kit
PartNumber: D3TZ-3249-A
Product Specifications- Notes: 4WD, W/O 3.45 Ratio
- Other Names: Joint Assembly, U-Joint, U-Joint Kit
- Item Weight: 1.70 Pounds
- Part Description: 1996 Ford Ranger U-Joint Kit
Vehicle Fitment- 1996 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$31.39 MSRP:$42.91You Save: $11.52 (27%)
SKF® Passenger Side Outer Greaseable U Joint for 1996 Ford Ranger
PartNumber: UJ377Product Specifications- Notes: w/114" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/125" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/125" WB & 3 Joint Front Shaft:; Brute Force Greaseable;w/108" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/114" WB & 3 Joint Front Shaft:; Brute Force Greaseable;w/108" WB & 3 Joint Front Shaft:; Brute Force Greaseable
- Inside Lock-Up 1: 2.188"
- Inside Lock-Up 2: 2.188"
- Outer Diameter: 1.188"
- Outer Diameter_1: 1.188"
- Outside Lock-Up 1: 3.220"
- Outside Lock-Up 2: 3.220"
- UPC: 085311099769
- Part Description: 1996 Ford Ranger Passenger Side Outer Greaseable U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$15.82
GMB® Grade Standard U-Joint for 1996 Ford Ranger
PartNumber: 218-0153Product Specifications- Notes: Std Grade; 2 Joint Driveshaft; Grease Fitting in Bearing Cap;Std Grade; 3 Joint Driveshaft; Grease Fitting in Bearing Cap
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.27
- Length Axis 2: 3.27
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Bearing Cap
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286112674
- Weight (Gross Pounds): 1.10
- Width (Inch): 3.50
- Part Description: 1996 Ford Ranger Grade Standard U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$13.51OEM (Genuine) 1996 Ford Ranger U-Joint
PartNumber: F1TZ-4635-C
Product Specifications- Notes: Ranger; A4ld/4r44e/4r55e Trans; Ranger; Front;Ranger; Rear
- Other Names: U-Joint, Universal Joints
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: F1TZ-4635-A, F2AZ-4635-A
- Part Description: 1996 Ford Ranger U-Joint
Vehicle Fitment- 1996 Ford Ranger | Custom, Edge, S, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$34.87 MSRP:$51.00You Save: $16.13 (32%)
SKF® Front Greaseable U Joint for 1996 Ford Ranger
PartNumber: UJ280Product Specifications- Notes: w/114" WB & 3 Joint Front Shaft:; Brute Force Greaseable;w/108" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/125" WB & 3 Joint Front Shaft:; Brute Force Greaseable;w/2 Joint Shaft:; Brute Force Greaseable;w/125" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/114" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/3 Joint Shaft:; Brute Force Greaseable;w/108" WB & 3 Joint Front Shaft:; Brute Force Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099226
- Part Description: 1996 Ford Ranger Front Greaseable U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$14.96
GMB® Grade Performance™ Front U-Joint for 1996 Ford Ranger
PartNumber: 215-0297Product Specifications- Notes: Perf Grade; Sealed Unit; 1.188" Bearing Cap Dia; 3 Joint Front Driveshaft;Perf Grade; Sealed Unit; 1.188" Bearing Cap Dia; 2 Joint Front Driveshaft
- Bearing Cap Diameter Axis 1 (in): 1.1900
- Bearing Cap Diameter Axis 2 (in): 1.1900
- Bearing Cap Finish: Machined
- Greasable: No
- Grease Zerks Included: No
- Item Grade: OEM Standard
- Pre-Greased: Yes
- Seal Color / Finish: Rubber
- Seal Material: Nitrile Rubber
- Snap Ring Type: Inside
- Universal Joint Cross Material: Chrome-Molybdenum Steel
- Universal Joint Type: (ISR) Inside Snap Ring Style
- UPC: 083286502970
- Part Description: 1996 Ford Ranger Grade Performance™ Front U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$13.20
SKF® Center Greaseable U Joint for 1996 Ford Ranger
PartNumber: UJ270Product Specifications- Notes: w/114" WB & 2 Joint Front Shaft:; Brute Force Greaseable;w/114" WB & 3 Joint Front Shaft:; Brute Force Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.622"
- UPC: 085311105927
- Part Description: 1996 Ford Ranger Center Greaseable U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$14.58
GMB® Grade Performance™ Rear U-Joint for 1996 Ford Ranger
PartNumber: 215-0153Product Specifications- Notes: Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: 1996 Ford Ranger Grade Performance™ Rear U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$12.45
SKF® Center Non Greaseable U Joint for 1996 Ford Ranger
PartNumber: UJ254Product Specifications- Notes: w/114" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable;w/114" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.622"
- UPC: 085311105873
- Part Description: 1996 Ford Ranger Center Non Greaseable U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$14.45
GMB® Grade Standard U-Joint for 1996 Ford Ranger
PartNumber: 210-0297Product Specifications- Notes: Std Grade; Sealed Unit; 1.188" Bearing Cap Dia; 3 Joint Front Driveshaft;Std Grade; Sealed Unit; 1.188" Bearing Cap Dia; 2 Joint Front Driveshaft
- Dimension: 1.188" Cap Diameter
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286002975
- Weight (Gross Pounds): 1.20
- Width (Inch): 3.50
- Part Description: 1996 Ford Ranger Grade Standard U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$11.90
SKF® Front U Joint for 1996 Ford Ranger
PartNumber: UJ354CProduct Specifications- Notes: w/114" WB & 2 Joint Front Shaft:; (For Alum Drive Shaft);w/114" WB & 3 Joint Front Shaft:; (For Alum Drive Shaft)
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.622"
- UPC: 085311561594
- Part Description: 1996 Ford Ranger Front U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$13.71
GMB® Grade Standard U-Joint for 1996 Ford Ranger
PartNumber: 210-0278Product Specifications- Notes: Std Grade; 3 Joint Driveshaft; Flush Type Grease Fitting in Cross;Std Grade; Flush Type Grease Fitting in Cross
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 27
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286002784
- Weight (Gross Pounds): 1.110
- Width (Inch): 3.50
- Part Description: 1996 Ford Ranger Grade Standard U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$9.48
SKF® Front Non Greaseable U Joint for 1996 Ford Ranger
PartNumber: UJ269Product Specifications- Notes: w/108" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable;w/2 Joint Shaft:; Brute Force Non Greaseable;w/125" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable;w/108" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable;w/114" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable;w/125" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable;w/3 Joint Shaft:; Brute Force Non Greaseable;w/114" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099219
- Part Description: 1996 Ford Ranger Front Non Greaseable U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$19.97
GMB® Spicer 1310 Series Grade Standard U-Joint for 1996 Ford Ranger
PartNumber: 210-0153Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft
- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: 1996 Ford Ranger Spicer 1310 Series Grade Standard U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$9.24
SKF® Passenger Side Outer Non Greaseable U Joint for 1996 Ford Ranger
PartNumber: UJ371Product Specifications- Notes: w/114" WB & 2 Joint Front Shaft:;w/125" WB & 2 Joint Front Shaft:;w/114" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable;w/125" WB & 3 Joint Front Shaft:;w/125" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable;w/108" WB & 3 Joint Front Shaft:; Brute Force Non Greaseable;w/114" WB & 3 Joint Front Shaft:;w/108" WB & 3 Joint Front Shaft:;w/114" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable;w/108" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable;w/108" WB & 2 Joint Front Shaft:;w/125" WB & 2 Joint Front Shaft:; Brute Force Non Greaseable
- Inside Lock-Up 1: 2.188"
- Outer Diameter: 1.188"
- UPC: 085311099707
- Part Description: 1996 Ford Ranger Passenger Side Outer Non Greaseable U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$13.19
SKF® Front U Joint for 1996 Ford Ranger
PartNumber: UJ369Product Specifications- Notes: w/125" WB & 3 Joint Front Shaft:;w/108" WB & 2 Joint Front Shaft:;w/114" WB & 3 Joint Front Shaft:;w/3 Joint Shaft:;w/125" WB & 2 Joint Front Shaft:;w/2 Joint Shaft:;w/114" WB & 2 Joint Front Shaft:;w/108" WB & 3 Joint Front Shaft:
- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099677
- Part Description: 1996 Ford Ranger Front U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$11.14
SKF® Center U Joint for 1996 Ford Ranger
PartNumber: UJ437-10Product Specifications- Notes: Clamp Kit (Rr. Shaft; Ctr.); w/125" WB & 3 Joint Front Shaft:;Clamp Kit (Frt. Shaft; Frt.); w/125" WB & 2 Joint Front Shaft:;Clamp Kit (Rr. Shaft; Frt.); w/125" WB & 3 Joint Front Shaft:;Clamp Kit (Frt. Shaft; Frt.); w/108" WB & 2 Joint Front Shaft:;Clamp Kit (Frt. Shaft; Rr.); w/108" WB & 2 Joint Front Shaft:;Clamp Kit (Frt. Shaft; Frt.); w/114" WB & 2 Joint Front Shaft:;Clamp Kit (Rr. Shaft; Rr.); w/108" WB & 3 Joint Front Shaft:;Clamp Kit (Rr. Shaft; Rr.); w/125" WB & 2 Joint Front Shaft:;Clamp Kit (Rr. Shaft; Frt.); w/125" WB & 2 Joint Front Shaft:;Clamp Kit (Center); w/3 Joint Shaft:;Clamp Kit (Frt. Shaft; Frt.); w/114" WB & 3 Joint Front Shaft:;Clamp Kit (Frt. Shaft; Rr.); w/114" WB & 2 Joint Front Shaft:;Clamp Kit (Front); w/2 Joint Shaft:;Clamp Kit (Frt. Shaft; Frt.); w/108" WB & 3 Joint Front Shaft:;Clamp Kit (Rr. Shaft; Rr.); w/125" WB & 3 Joint Front Shaft:;Clamp Kit (Front); w/3 Joint Shaft:;Clamp Kit (Frt. Shaft; Rr.); w/125" WB & 2 Joint Front Shaft:;Clamp Kit (Rear); w/3 Joint Shaft:;Clamp Kit (Frt. Shaft; Frt.); w/125" WB & 3 Joint Front Shaft:;Clamp Kit (Rear); w/2 Joint Shaft:;Clamp Kit (Rr. Shaft; Rr.); w/108" WB & 2 Joint Front Shaft:;Clamp Kit (Rr. Shaft; Ctr.); w/125" WB & 2 Joint Front Shaft:
- UPC: 085311177665
- Width: 0.995"
- Part Description: 1996 Ford Ranger Center U Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$4.08
GMB® Grade Standard U-Joint for 1996 Ford Ranger
PartNumber: 210-0456Product Specifications- Notes: Std Grade; Sealed Unit; 1.063" Bearing Cap Dia; 2 Joint Front Driveshaft;Std Grade; Sealed Unit; 1.063" Bearing Cap Dia; 3 Joint Front Driveshaft
- Dimension: 1.063" Cap Diameter
- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286004566
- Width (Inch): 3.50
- Part Description: 1996 Ford Ranger Grade Standard U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$11.07
GMB® Grade Standard U-Joint for 1996 Ford Ranger
PartNumber: 215-0299Product Specifications- Notes: Std Grade; 1.188" Bearing Cap Dia; Grease Fitting in Bearing Cap; 3 Joint Front Driveshaft;Std Grade; 1.188" Bearing Cap Dia; Grease Fitting in Bearing Cap; 2 Joint Front Driveshaft
- Dimension: 1.188" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Lube Fitting Location: Grease Fitting in Bearing Cap
- UPC: 083286110557
- Weight (Gross Pounds): 1.20
- Width (Inch): 3.50
- Part Description: 1996 Ford Ranger Grade Standard U-Joint
Vehicle Fitment- 1996 Ford Ranger | All Trims | All Engines
$12.16OEM (Genuine) 1996 Ford Ranger Universal Joints
PartNumber: E3TZ3249AProduct Specifications- Notes: 4WD, W/3.45 Ratio
- Part Description: 1996 Ford Ranger Universal Joints
Vehicle Fitment- 1996 Ford Ranger | Base, Custom, GT, S, S Plus, Splash, Sport, STX, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS