< Back ×
My Vehicle Change Vehicle
1992 Ford F-250
< Back to View All
Fuel Systems
- Department
- Product Fit
- Brands
- Prices
OEM (Genuine) 1992 Ford F-250 Fuel Gauge Sending Unit
PartNumber: FOTZ-9A299-BA
Product Specifications- Notes: Midship Fuel Tank, Gas Engine, 19 Gallon Tank
- Item Dimensions: 8.2 x 3.1 x 5.9 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Ford F-250 Fuel Gauge Sending Unit
Vehicle Fitment- 1992 Ford F-250 | Base, Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
$147.39 MSRP:$243.64You Save: $96.25 (40%)
Delphi® Fuel Pump Module Assembly for 1992 Ford F-250
PartNumber: FG0198Product Specifications- Notes: with 2 Tube Ports;with 3 Tube Ports;Can Only be Used if Original Ford Module is Still in the Tank;with 19 Gallon Plastic Aft Axle Tank;with 17 Gallon Steel Midship Tank;with 19 Gallon Steel Midship Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.;17 Gallon Midship Steel Fuel Tank; 19 Gallon Aft Axle Plastic Fuel Tank; 19 Gallon Midship Steel Fuel Tank - w/2 Tube Ports; 19 Gallon Midship Steel Fuel Tank - w/3 Tube Ports; w/o Fuel Level Sender; Can only be used if Original Ford Module is still in the tank; Strainer Incld; Delphi is an OEM supplier; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 12
- Flow Rating: 24 gph
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: External
- Item Grade: Standard Replacement
- Maximum Pressure: 70.0 PSI
- Outlet Outside Diameter: 0.313''
- Outlet Type: Female Quick Connect
- Pump Type: Electric
- Strainer Included: Yes
- System Pressure: 45 psi
- Terminal Quantity: 2
- Terminal Type: Lead Wire
- UPC: 689604219867
- Voltage: 12.0 VDC
- Wiring Harness Included: No
- Part Description: 1992 Ford F-250 Fuel Pump Module Assembly
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
$119.36
Autobest® Fuel Pump and Strainer Set for 1992 Ford F-250
PartNumber: F1060AProduct Specifications- Notes: with 19 Gallon Tank;Rear Plastic Tank;Includes Fuel Pump, Fuel Reservoir, Fuel Strainer and Tank Seal;Center Tank
- Average Current Draw(A): 7
- Average Flow Rating(GPH): 31.3
- Country of Orign: China
- Fuel Filter Included: No
- Fuel Sending Unit Included: No
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.7
- Inlet Type: Strainer
- Installation Warnings: No
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 101.5
- Minimum Pump Pressure (PSI): 79.75
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Size: 0.314
- Outlet Type: Metallic Conduit
- Product Height (in): 3.46
- Product Length (in): 6.77
- Product Width (in): 5.28
- Pump Type: Turbine
- Regulator Included: No
- UPC: 00072845110602
- Voltage: 12V
- Weight (lbs): 1.47
- Wire Harness Included: No
- Part Description: 1992 Ford F-250 Fuel Pump and Strainer Set
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
$42.09OEM (Genuine) 1992 Ford F-250 Fuel Sender Unit
PartNumber: FOTZ-9A299-AA
Product Specifications- Notes: Midship Fuel Tank, Gas Engine, 17 Gallon Tank
- Other Names: Fuel Pump Assembly, Fuel Sender Unit
- Item Dimensions: 8.3 x 3.0 x 6.2 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Ford F-250 Fuel Sender Unit
Vehicle Fitment- 1992 Ford F-250 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
$112.99 MSRP:$181.82You Save: $68.83 (38%)
Delphi® Fuel Pump Module Assembly for 1992 Ford F-250
PartNumber: FG0199Product Specifications- Notes: with 18 Gallon Steel Aft Axle Tank;Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.;18 Gallon Aft Axle Steel Fuel Tank; Ext Strainer; w/o Fuel Level Sender; Delphi is an OEM supplier; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 12
- Flow Rating: 24 gph
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: External
- Item Grade: Standard Replacement
- Maximum Pressure: 70.0 PSI
- Outlet Outside Diameter: 0.313''
- Outlet Type: Female Quick Connect
- Pump Type: Electric
- Strainer Included: Yes
- System Pressure: 45 psi
- Terminal Quantity: 2
- Terminal Type: Lead Wire
- UPC: 689604219874
- Voltage: 12.0 VDC
- Wiring Harness Included: No
- Part Description: 1992 Ford F-250 Fuel Pump Module Assembly
Vehicle Fitment- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
$101.95
Autobest® Fuel Pump and Strainer Set for 1992 Ford F-250
PartNumber: F1075AProduct Specifications- Notes: with 18 Gallon Tank;Rear Steel Tank;Includes Fuel Pump, Fuel Reservoir, Fuel Strainer and Tank Seal
- Average Current Draw(A): 7
- Average Flow Rating(GPH): 31.3
- Country of Orign: China
- Fuel Filter Included: No
- Fuel Sending Unit Included: No
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.7
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 101.5
- Minimum Pump Pressure (PSI): 79.75
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Size: 0.311
- Outlet Type: Metallic Conduit
- Product Height (in): 3.27
- Product Length (in): 6.16
- Product Width (in): 3.35
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: Yes
- UPC: 00072845110756
- Voltage: 12V
- Weight (lbs): 1.43
- Wire Harness Included: No
- Part Description: 1992 Ford F-250 Fuel Pump and Strainer Set
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
$42.05
Delphi® Mechanical Fuel Pump for 1992 Ford F-250
PartNumber: MF0050Product Specifications- Flow Rating: 30 gph
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- Inlet Outside Diameter: 0.375''
- Inlet Type: Hose Bead
- Item Grade: Standard Replacement
- Outlet Fitting Thread Size: 5/8'' - 18 UNF
- Outlet Quantity: 1
- Outlet Type: Threaded
- System Pressure: 5 psi
- UPC: 689604212721
- Part Description: 1992 Ford F-250 Mechanical Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | All Trims | 8 Cyl 7.3L
$26.61
GMB® Mechanical Fuel Pump for 1992 Ford F-250
PartNumber: 525-8010Product Specifications- Mounting Hardware Included: 2 PAPER GASKETS
- UPC: 083286166516
- Part Description: 1992 Ford F-250 Mechanical Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | All Trims | 8 Cyl 7.3L
$31.08
GMB® Fuel Pump Module Assembly for 1992 Ford F-250
PartNumber: 599-2010Product Specifications- Notes: w/18 Gallon Steel Rear Fuel Tank
- Fuel Sending Unit Included: No
- Fuel Type: Gasoline
- Maximum Flow Rating: 120
- Maximum Pressure: 7
- UPC: 083286141544
- Part Description: 1992 Ford F-250 Fuel Pump Module Assembly
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
$54.73
Autobest® High Performance Fuel Pump And Strainer Set for 1992 Ford F-250
PartNumber: HP1060AProduct Specifications- Notes: with 19 Gallon Tank;Includes Fuel Pump, Fuel Reservoir, Fuel Strainer and Tank Seal;Center Tank;Rear Plastic Tank
- Average Current Draw(A): 6
- Average Flow Rating(GPH): 36.7
- Country of Orign: China
- Fuel Filter Included: No
- Fuel Sending Unit Included: No
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.7
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 101.5
- Minimum Pump Pressure (PSI): 79.75
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Product Height (in): 5.2
- Product Length (in): 8.6
- Product Width (in): 5.2
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: Yes
- UPC: 00072845150608
- Voltage: 12V
- Weight (lbs): 3
- Wire Harness Included: No
- Part Description: 1992 Ford F-250 High Performance Fuel Pump And Strainer Set
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
$48.10
Autobest® High Performance Fuel Pump And Strainer Set for 1992 Ford F-250
PartNumber: HP1075AProduct Specifications- Notes: with 18 Gallon Tank;Rear Steel Tank;Includes Fuel Pump, Fuel Reservoir, Fuel Strainer and Tank Seal
- Average Current Draw(A): 6
- Average Flow Rating(GPH): 36.7
- Country of Orign: China
- Fuel Filter Included: No
- Fuel Sending Unit Included: No
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.7
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 101.5
- Minimum Pump Pressure (PSI): 79.75
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Product Height (in): 5.2
- Product Length (in): 8.6
- Product Width (in): 5.2
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: Yes
- UPC: 00072845150752
- Voltage: 12V
- Weight (lbs): 4
- Wire Harness Included: No
- Part Description: 1992 Ford F-250 High Performance Fuel Pump And Strainer Set
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
$48.05
Airtex® Electric Fuel Pump for 1992 Ford F-250
PartNumber: E2064MNProduct Specifications- Notes: with Steel Tank;w/Steel Tank
- Gasket Included: Y
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Strainer
- Item Grade: Standard Replacement
- Maximum Free Flow Rate (gph): 50
- Maximum Pressure Rate (psi): 110
- Minimum Free Flow Rate (gph): 50
- Minimum Pressure Rate (psi): 100
- Outlet Count: 1
- Outlet Type: No External Fittings
- Package Contents: Pump & Kit
- Package Quantity: 1
- UPC: 080044521204
- Warranty: Lifetime Limited Warranty
- Part Description: 1992 Ford F-250 Electric Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
Airtex® Mechanical Fuel Pump for 1992 Ford F-250
PartNumber: 60278Product Specifications- Gasket Included: Y
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Threaded
- Item Grade: Standard Replacement
- Maximum Pressure Rate (psi): 5.75
- Minimum Free Flow Rate (gph): 30 GPH @ 1800 RPM
- Minimum Pressure Rate (psi): 4.5
- Outlet Count: 1
- Outlet Size: 5/8-18 UNF-2B I.F.
- Outlet Type: Threaded
- Package Contents: Pump & Kit
- Package Quantity: 1
- Warranty: Limited 1 Year
- Part Description: 1992 Ford F-250 Mechanical Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | All Trims | 8 Cyl 7.3L
Denso® Fuel Pump Module Assembly for 1992 Ford F-250
PartNumber: 953-3004Product Specifications- Notes: Midship Steel Fuel Tank (Pump Assy w/o Hanger); OE Replacement Module Assy w/o Hanger;Aft Axle Plastic Fuel Tank (Pump Assy w/o Hanger); OE Replacement Module Assy w/o Hanger
- Gaskets Included: Yes
- Internet Product Code (IPC): 5C64A9CBC47
- Item Grade: Premium Replacement
- Item has MSDS (SDS): Y
- MFG Brand Name: DENSO Auto Parts
- MFG Model # (Series): 953-3004
- MFG Name: DENSO
- Package Contents: Fuel Pump Module
- Supplier Company Name: DENSO
- Universal Or Specific Fit: Specific
- UPC: 042511095441
- Part Description: 1992 Ford F-250 Fuel Pump Module Assembly
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
Hella® Fuel Pump for 1992 Ford F-250
PartNumber: H75030441Product Specifications- Notes: 33GPH HI; 45PSI; 13V;13V; 45PSI; 33GPH HI; IN-TANK;19 Gallon Midship Gas Tank; Steel; 13V; 45PSI;13V; Steel; 19 Gallon Midship Gas Tank;13V; Steel; 17 Gallon Midship Gas Tank;17 Gallon Midship Gas Tank; Steel; 13V; 45PSI
- UPC: 760687051893
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
Denso® Fuel Pump Module Assembly for 1992 Ford F-250
PartNumber: 953-3005Product Specifications- Notes: Aft Axle Steel Fuel Tank (Pump Assy w/o Hanger); OE Replacement Module Assy w/o Hanger
- Gaskets Included: Yes
- Internet Product Code (IPC): E39D786B1C7
- Item Grade: Premium Replacement
- Item has MSDS (SDS): Y
- MFG Brand Name: DENSO Auto Parts
- MFG Model # (Series): 953-3005
- MFG Name: DENSO
- Package Contents: Fuel Pump Module
- Supplier Company Name: DENSO
- Universal Or Specific Fit: Specific
- UPC: 042511095458
- Part Description: 1992 Ford F-250 Fuel Pump Module Assembly
Vehicle Fitment- 1992 Ford F-250 | All Trims | 6 Cyl 4.9L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.0L
- 1992 Ford F-250 | All Trims | 8 Cyl 7.5L
- 1992 Ford F-250 | All Trims | 8 Cyl 5.8L
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: E3TZ-9350-B
Product Specifications- Notes: F250 Pick-Up; 7.3l Diesel; 7.3 Liter Diesel
- Other Names: Fuel Pump
- Item Dimensions: 4.6 x 4.5 x 12.4 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Base, Custom, XL, XLT, XLT Lariat | 8 Cyl 6.9 L DIESEL, 8 Cyl 7.3 L DIESEL
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: F6TZ-9A407-AB
Product Specifications- Notes: Midship Fuel Tank, Gas Engine, 17 Gallon Tank
- Other Names: Fuel Pump
- Item Dimensions: 17.0 x 6.0 x 8.2 inches
- Item Weight: 3.40 Pounds
- Replaces: F6TZ-9A407-AA
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: F6TZ-9A407-CC
Product Specifications- Notes: F250 Pick-Up; 4.9l; In Tank; Aft Axle Tank; Aft-Axle Fuel Tank, Gas Engine, 18 Gallon Tank
- Other Names: Fuel Pump
- Item Dimensions: 14.6 x 6.1 x 8.2 inches
- Item Weight: 2.90 Pounds
- Replaces: F6TZ-9A407-CA, F4TZ-9A407-C
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: F6TZ-9A407-BB
Product Specifications- Notes: F250 Pick-Up; 5.8l; Midship Fuel Tank, Gas Engine, 19 Gallon, 2 Port
- Other Names: Fuel Pump
- Item Dimensions: 16.5 x 6.2 x 8.0 inches
- Item Weight: 3.40 Pounds
- Replaces: F6TZ-9A407-BA
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: F6TZ-9A407-EBProduct Specifications- Notes: Aft-Axle Fuel Tank, Gas Engine, 19 Gallon Tank
- Other Names: Fuel Pump
- Item Dimensions: 16.3 x 8.1 x 9.1 inches
- Item Weight: 3.00 Pounds
- Replaces: F6TZ-9A407-EA
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: F6TZ-9A407-KBProduct Specifications- Notes: Midship Fuel Tank, Gas Engine, 19 Gallon, 3 Port
- Other Names: Fuel Pump
- Item Dimensions: 6.2 x 8.8 x 12.9 inches
- Item Weight: 3.20 Pounds
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Base, Custom, Eddie Bauer, Lariat, Special, XL, XLT, XLT Lariat | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
OEM (Genuine) 1992 Ford F-250 Fuel Pump
PartNumber: F4TZ9A407PProduct Specifications- Notes: F250 Pick-Up; 5.0l
- Part Description: 1992 Ford F-250 Fuel Pump
Vehicle Fitment- 1992 Ford F-250 | Custom, XL, XLT, XLT Lariat | 8 Cyl 5.0 L GAS