< Back ×
My Vehicle Change Vehicle
1991 Chevrolet S10
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 1991 Chevrolet S10 Shaft Kit, Front Upper Control Arm
PartNumber: 12385857
Product Specifications- Notes: 2WD, W/Bushing Kit
- Location: Driver Side; Passenger Side
- Item Dimensions: 4.5 x 4.5 x 17.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Shaft Kit, Front Upper Control Arm
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$51.39 MSRP:$103.65You Save: $52.26 (51%)
OEM (Genuine) 1991 Chevrolet S10 Front Wheel Drive Shaft Kit
PartNumber: 26055390
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 26.5 x 6.9 x 7.5 inches
- Item Weight: 21.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26027966, 7844070, 07844070
- Part Description: 1991 Chevrolet S10 Front Wheel Drive Shaft Kit
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, ZR2 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Axle Asm-Front (3.08 Ratio)
PartNumber: 26029954
Product Specifications- Notes: 4WD
- Other Names: Axle Assembly, Differential Assembly
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Axle Asm-Front (3.08 Ratio)
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
Cardone Reman® Remanufactured Driveshafts for 1991 Chevrolet S10
PartNumber: 65-9358Product Specifications- Notes: with 26" (660 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 26"
- Length (mm): 660,4
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1991 Chevrolet S10 Remanufactured Driveshafts
Vehicle Fitment- 1991 Chevrolet S10 | All Trims | All Engines
OEM (Genuine) 1991 Chevrolet S10 Rear Axle Drive Shaft
PartNumber: 26013882
Product Specifications- Notes: S-Series; 4WD; W/O 4 Door; 7.625 Dia.; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 32.6 x 6.8 x 6.5 inches
- Item Weight: 16.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Rear Axle Drive Shaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Front Propeller Shaft
PartNumber: 7841336
Product Specifications- Notes: S-Series; 4WD; S-10/15 Pick-Up; Extended Cab; Front
- Other Names: Drive Shaft
- Item Dimensions: 32.6 x 9.5 x 6.5 inches
- Item Weight: 16.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Front Propeller Shaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, Tahoe, ZR2 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Rear Propeller Shaft Assembly
PartNumber: 7841475Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-10/15 Pick-Up; Extended Cab; Rear;S-Series; 2WD; Manual Trans; S-10/15 Pick-Up; Extended Cab; Rear
- Other Names: Drive Shaft
- Item Dimensions: 49.9 x 4.4 x 4.5 inches
- Item Weight: 17.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Rear Propeller Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Front Propeller Shaft Assembly
PartNumber: 7845814Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-10/15 Pick-Up; Extended Cab; Front;S-Series; 2WD; Manual Trans; S-10/15 Pick-Up; Extended Cab; Front
- Other Names: Drive Shaft
- Item Dimensions: 43.9 x 10.1 x 7.6 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Front Propeller Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Rear Propeller Shaft Assembly
PartNumber: 7841488Product Specifications- Notes: S-Series; 4WD; S-10/15 Pick-Up; Extended Cab; Rear
- Other Names: Drive Shaft
- Item Dimensions: 50.5 x 4.7 x 4.8 inches
- Item Weight: 15.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Rear Propeller Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, Tahoe, ZR2 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Rear Axle Propeller Shaft Assembly
PartNumber: 7837420Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-10/15 Pick-Up; Long Bed; Rear;S-Series; 2WD; Manual Trans; S-10/15 Pick-Up; Long Bed; Rear
- Other Names: Drive Shaft
- Item Dimensions: 51.5 x 4.7 x 4.7 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Rear Axle Propeller Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Propeller Shaft Assembly
PartNumber: 7844404Product Specifications- Notes: S-Series; 4WD; S-10/15 Pick-Up; Long Bed;S-Series; 4WD; S-10/15 Pick-Up; Regular Bed
- Other Names: Drive Shaft
- Item Dimensions: 69.2 x 4.8 x 4.5 inches
- Item Weight: 18.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Propeller Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, EL, LS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Propeller Shaft Assembly
PartNumber: 7844401Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-10/15 Pick-Up; Regular Bed;S-Series; 2WD; Manual Trans; S-10/15 Pick-Up; Regular Bed
- Other Names: Drive Shaft
- Item Dimensions: 71.1 x 4.7 x 4.4 inches
- Item Weight: 18.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Propeller Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Rear Axle Drive Shaft
PartNumber: 26009534Product Specifications- Notes: 2WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 30.3 x 6.4 x 6.5 inches
- Item Weight: 14.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Rear Axle Drive Shaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Differential Shaft Assembly
PartNumber: 14041986
Product Specifications- Notes: 4WD; S-Series; Left; S-Series
- Location: Driver Side
- Item Dimensions: 7.9 x 7.5 x 7.7 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Differential Shaft Assembly
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, ZR2 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Rear Axle Drive Shaft
PartNumber: 26015260Product Specifications- Notes: S-Series; 4WD; W/4 Door
- Other Names: Axle Shaft
- Item Dimensions: 30.9 x 5.8 x 6.1 inches
- Item Weight: 15.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Rear Axle Drive Shaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Shaft Kit, Front Drive Axle Inner
PartNumber: 26034185
Product Specifications- Notes: 4WD
- Location: Passenger Side
- Other Names: Axle Shaft, Inner Joint Assembly, Output Shaft
- Item Dimensions: 17.4 x 6.5 x 6.6 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Shaft Kit, Front Drive Axle Inner
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Shaft-Rear Axle
PartNumber: 14030355Product Specifications- Notes: S-Series; 2WD; W/O 4 Door; 7.50 Dia.
- Other Names: Axle Shaft
- Item Dimensions: 28.4 x 6.2 x 6.1 inches
- Item Weight: 14.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Shaft-Rear Axle
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Axle Shaft
PartNumber: 7844114
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Outer Joint Assembly, Shaft
- Item Dimensions: 18.4 x 1.8 x 1.8 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1991 Chevrolet S10 Axle Shaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Driveshaft
PartNumber: 14041991Product Specifications- Notes: S-Series; Right
- Part Description: 1991 Chevrolet S10 Driveshaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Driveshaft
PartNumber: 14041997Product Specifications- Notes: S-Series
- Part Description: 1991 Chevrolet S10 Driveshaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Driveshaft
PartNumber: 26015256Product Specifications- Notes: S-Series; 2WD; W/4 Door
- Part Description: 1991 Chevrolet S10 Driveshaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1991 Chevrolet S10 Driveshaft
PartNumber: 7845813Product Specifications- Notes: S-Series; 2WD; Auto Trans; S-10/15 Pick-Up; Long Bed; Front;S-Series; 2WD; Manual Trans; S-10/15 Pick-Up; Long Bed; Front
- Part Description: 1991 Chevrolet S10 Driveshaft
Vehicle Fitment- 1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS