< Back ×
My Vehicle Change Vehicle
1990 GMC K2500
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 1990 GMC K2500 Inner Shaft
PartNumber: 19121908
Product Specifications- Notes: 4WD, Axle Clutch, 1500 & 2500; All Models; Under 7500 Gvw
- Other Names: Inner Shaft, Output Shaft, Shaft
- Item Dimensions: 7.0 x 4.6 x 4.6 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15588366, 12479219, 15801502
- Part Description: 1990 GMC K2500 Inner Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$205.99 MSRP:$340.95You Save: $134.96 (40%)
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1990 GMC K2500
PartNumber: 65-9346Product Specifications- Notes: with 7200 lb Gross Vehicle Weight (GVW);with 30-1/4" (768 mm) Long Driveshaft;Supplied as new; Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 30.25"
- Length (mm): 768
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1990 GMC K2500 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1990 GMC K2500 | All Trims | All Engines
$289.16
OEM (Genuine) 1990 GMC K2500 Inner Shaft
PartNumber: 19121909
Product Specifications- Notes: All Models; Over 7500 Gvw
- Other Names: Inner Shaft, Pinion Shaft, Shaft
- Item Dimensions: 8.8 x 3.9 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15521907
- Part Description: 1990 GMC K2500 Inner Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$213.29 MSRP:$353.04You Save: $139.75 (40%)
OEM (Genuine) 1990 GMC K2500 Shaft
PartNumber: 7849300
Product Specifications- Notes: 4WD, 1500 & 2500
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft, Shaft
- Item Dimensions: 18.5 x 2.0 x 1.8 inches
- Item Weight: 5.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
$51.22 MSRP:$92.72You Save: $41.50 (45%)
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1990 GMC K2500
PartNumber: 65-9344Product Specifications- Notes: with 30" (762 mm) Long Driveshaft;with 8600 lb Gross Vehicle Weight (GVW);Except Saginaw Flange;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 30"
- Length (mm): 762
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1990 GMC K2500 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1990 GMC K2500 | All Trims | All Engines
OEM (Genuine) 1990 GMC K2500 Differential Output Shaft Assembly LH
PartNumber: 26006824
Product Specifications- Notes: 4WD, 1500 & 2500; All Models; Under 7500 Gvw; Left
- Location: Driver Side
- Other Names: Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 6.7 x 6.6 x 6.6 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Differential Output Shaft Assembly LH
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Axle Shaft
PartNumber: 3977383
Product Specifications- Notes: 3/4 & 1 Ton W/10.5" Ring Gear, W/O Dual Wheels
- Location: Driver Side
- Item Dimensions: 33.6 x 4.4 x 4.3 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Axle Shaft
Vehicle Fitment- 1990 GMC K2500 | Base, High Sierra, Sierra, Sierra Classic, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Front Wheel Drive Shaft Kit
PartNumber: 26062614
Product Specifications- Notes: All Models; Heavy Duty
- Other Names: Axle Assembly
- Item Dimensions: 27.0 x 6.9 x 7.7 inches
- Item Weight: 28.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26055393, 26037363, 26020727
- Part Description: 1990 GMC K2500 Front Wheel Drive Shaft Kit
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Front Wheel Drive Shaft Kit
PartNumber: 26062613Product Specifications- Notes: 4WD, 1500 & 2500; All Models; Standard
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 27.1 x 7.1 x 6.9 inches
- Item Weight: 23.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037365
- Part Description: 1990 GMC K2500 Front Wheel Drive Shaft Kit
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Differential Output Shaft Assembly RH
PartNumber: 26006822
Product Specifications- Notes: 4WD, 1500 & 2500; All Models; Under 7500 Gvw; Right
- Location: Passenger Side
- Other Names: Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 16.9 x 6.4 x 6.6 inches
- Item Weight: 8.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Differential Output Shaft Assembly RH
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Rear Axle Drive Shaft
PartNumber: 26013313Product Specifications- Notes: All Models; 2nd Design
- Other Names: Axle Shaft
- Item Dimensions: 36.1 x 7.1 x 6.8 inches
- Item Weight: 19.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Rear Axle Drive Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
OEM (Genuine) 1990 GMC K2500 Rear Axle Drive Shaft
PartNumber: 26011162
Product Specifications- Notes: 3/4 & 1 Ton W/10.5" Ring Gear, W/Dual Wheels
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 43.3 x 4.7 x 4.6 inches
- Item Weight: 19.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Rear Axle Drive Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Rear Axle Shaft
PartNumber: 14035395Product Specifications- Notes: All Models; Right
- Other Names: Axle Shaft
- Item Dimensions: 35.5 x 8.2 x 8.2 inches
- Item Weight: 27.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Rear Axle Shaft
Vehicle Fitment- 1990 GMC K2500 | Base, High Sierra, Sierra, Sierra Classic, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
OEM (Genuine) 1990 GMC K2500 Rear Axle Drive Shaft
PartNumber: 26011161Product Specifications- Notes: 3/4 & 1 Ton W/10.5" Ring Gear, W/Dual Wheels
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 39.9 x 4.7 x 4.6 inches
- Item Weight: 19.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Rear Axle Drive Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Rear Axle Drive Shaft
PartNumber: 15521928
Product Specifications- Notes: 3/4 & 1 Ton W/9.5" Ring Gear, 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 35.9 x 8.2 x 8.2 inches
- Item Weight: 26.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Rear Axle Drive Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Axle Shaft
PartNumber: 15522068Product Specifications- Notes: 3/4 & 1 Ton W/9.5" Ring Gear, 2WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 33.8 x 8.4 x 8.2 inches
- Item Weight: 23.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Axle Shaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Front Drive Axle Inner Shaft Kit (Rh)
PartNumber: 26031836
Product Specifications- Notes: All Models; Over 7500 Gvw; Right
- Other Names: Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 17.4 x 6.4 x 6.3 inches
- Item Weight: 11.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26009629
- Part Description: 1990 GMC K2500 Front Drive Axle Inner Shaft Kit (Rh)
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Differential Output shaft Assembly LH
PartNumber: 26009627
Product Specifications- Notes: All Models; Over 7500 Gvw; Left
- Other Names: Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 6.9 x 6.6 x 6.4 inches
- Item Weight: 6.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Differential Output shaft Assembly LH
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
OEM (Genuine) 1990 GMC K2500 Shaft, Rear Axle
PartNumber: 14035355Product Specifications- Notes: All Models; Left
- Other Names: Axle Shaft
- Item Dimensions: 37.1 x 8.4 x 8.4 inches
- Item Weight: 28.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1990 GMC K2500 Shaft, Rear Axle
Vehicle Fitment- 1990 GMC K2500 | Base, High Sierra, Sierra, Sierra Classic, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
OEM (Genuine) 1990 GMC K2500 Driveshaft
PartNumber: 26011092Product Specifications- Notes: 3/4 & 1 Ton W/10.5" Ring Gear, W/O Dual Wheels
- Location: Passenger Side
- Part Description: 1990 GMC K2500 Driveshaft
Vehicle Fitment- 1990 GMC K2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS