Notes: with 7200 lb Gross Vehicle Weight (GVW);with 30-1/4" (768 mm) Long Driveshaft;Supplied as new; Measurement is taken from center of U-joint to the end of flange on the opposite side
Greasable: Yes
Length: 30.25"
Length (mm): 768
Material: Steel
Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 1989 Chevrolet K2500 Remanufactured Driveshaft/ Prop Shaft
1989 Chevrolet K2500 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Notes: with 30" (762 mm) Long Driveshaft;Except Saginaw Flange;with 8600 lb Gross Vehicle Weight (GVW);Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Greasable: Yes
Length: 30"
Length (mm): 762
Material: Steel
Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 1989 Chevrolet K2500 Remanufactured Driveshaft/ Prop Shaft
Notes: 4WD, 1500 & 2500; All Models; Under 7500 Gvw; Left
Location: Driver Side
Other Names: Inner Shaft, Outer Shaft, Output Shaft
Item Dimensions: 6.7 x 6.6 x 6.6 inches
Item Weight: 5.10 Pounds
Fitment Type: Direct Replacement
Part Description: 1989 Chevrolet K2500 Differential Output Shaft Assembly LH
More Info
Vehicle Fitment
1989 Chevrolet K2500 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Notes: 4WD, 1500 & 2500; All Models; Under 7500 Gvw; Right
Location: Passenger Side
Other Names: Inner Shaft, Outer Shaft, Output Shaft
Item Dimensions: 16.9 x 6.4 x 6.6 inches
Item Weight: 8.80 Pounds
Fitment Type: Direct Replacement
Part Description: 1989 Chevrolet K2500 Differential Output Shaft Assembly RH
More Info
Vehicle Fitment
1989 Chevrolet K2500 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Names: Inner Shaft, Outer Shaft, Output Shaft
Item Dimensions: 17.4 x 6.4 x 6.3 inches
Item Weight: 11.30 Pounds
Fitment Type: Direct Replacement
Replaces: 26009629
Part Description: 1989 Chevrolet K2500 Front Drive Axle Inner Shaft Kit (Rh)
More Info
Vehicle Fitment
1989 Chevrolet K2500 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Names: Inner Shaft, Outer Shaft, Output Shaft
Item Dimensions: 6.9 x 6.6 x 6.4 inches
Item Weight: 6.60 Pounds
Fitment Type: Direct Replacement
Part Description: 1989 Chevrolet K2500 Differential Output shaft Assembly LH
More Info
Vehicle Fitment
1989 Chevrolet K2500 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS