< Back ×
My Vehicle Change Vehicle
1988 Jeep Cherokee
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1988 Jeep Cherokee
PartNumber: 65-9436Product Specifications- Notes: with 4.11 Axle Ratio;with 25-3/4" (654 mm) Long Driveshaft;with 231 Transfer Case;with 3.55 Axle Ratio;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 25.75"
- Length (mm): 654,05
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Jeep Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Jeep Cherokee | All Trims | 4 Cyl 2.5L
$390.10
OEM (Genuine) 1988 Jeep Cherokee Front Axle Shaft
PartNumber: 4797135
Product Specifications- Notes: 4WD, Part Time Axle, Universal Joint Type; Cardan Joint; Right; W/Vacuum Disconnect
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Part Description: 1988 Jeep Cherokee Front Axle Shaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Country, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Axle Shaft Assembly
PartNumber: 4874302
Product Specifications- Notes: 4WD, Full Time Axle, Universal Joint Type, W/O ABS; Cardan Joint; Right; W/O Vacuum Disconnect
- Location: Passenger Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 43.4 x 5.6 x 5.5 inches
- Item Weight: 18.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Jeep Cherokee Axle Shaft Assembly
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Axle Shaft Assembly
PartNumber: 4874303Product Specifications- Notes: 4WD, Full Time Axle, Universal Joint Type, W/O ABS; 4WD, Part Time Axle, Universal Joint Type; Cardan Joint; Left
- Location: Driver Side
- Other Names: Axle Assembly, Axle Shaft
- Item Dimensions: 32.6 x 6.4 x 6.5 inches
- Item Weight: 11.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Jeep Cherokee Axle Shaft Assembly
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1988 Jeep Cherokee
PartNumber: 65-9438Product Specifications- Notes: with 29-1/4" (743 mm) Long Driveshaft;with 231 Transfer Case;with 3.08 Axle Ratio;with 242 Transfer Case;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 29.25"
- Length (mm): 742,95
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Jeep Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Jeep Cherokee | All Trims | 6 Cyl 4.0L
OEM (Genuine) 1988 Jeep Cherokee Shaft-Stub
PartNumber: 83500184
Product Specifications- Notes: 4WD, Full Time Axle; 4WD, Part Time Axle
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly, Outer Shaft
- Fitment Type: Direct Replacement
- Part Description: 1988 Jeep Cherokee Shaft-Stub
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1988 Jeep Cherokee
PartNumber: 65-9671Product Specifications- Notes: with 4.11 Axle Ratio;with Kanda Transfer Case;with 28" (711 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 28"
- Length (mm): 711,2
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Jeep Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Jeep Cherokee | All Trims | 6 Cyl 4.0L
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 5017166AAProduct Specifications- Notes: 2WD
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 1988 Jeep Cherokee
PartNumber: 65-9738Product Specifications- Notes: with 231 Transfer Case;with 30-11/16" (779 mm) Long Driveshaft;with 3.55 Axle Ratio;with 242 Transfer Case;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 30.687"
- Length (mm): 779,462
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1988 Jeep Cherokee Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1988 Jeep Cherokee | All Trims | 6 Cyl 4.0L
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 53000227Product Specifications- Notes: CV Joint Type; Left
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 53000686Product Specifications- Notes: CV Joint Type; Right; W/Vacuum Disconnect
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 53002128Product Specifications- Notes: CV Joint Type; Right; W/O Vacuum Disconnect
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Axle Shaft Kit Rear Passenger Right Siderh Hand
PartNumber: 83502882Product Specifications- Notes: Station Wagon, Dana 35 Axle, W/O ABS; Wagon; Xj Series; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 31.6 x 6.7 x 6.1 inches
- Item Weight: 18.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1988 Jeep Cherokee Axle Shaft Kit Rear Passenger Right Siderh Hand
Vehicle Fitment- 1988 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83502883Product Specifications- Notes: Station Wagon, Dana 35 Axle, W/O ABS; Wagon; Xj Series; Left
- Location: Driver Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83503090Product Specifications- Notes: W/O Dana Model 60 Axle, Station Wagon, W/O Bearing
- Location: Passenger Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83503091Product Specifications- Notes: W/O Dana Model 60 Axle, Station Wagon, W/O Bearing
- Location: Driver Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83504939Product Specifications- Notes: Station Wagon, Dana 35 Standard
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83504962Product Specifications- Notes: Station Wagon, Dana 35 Axle, W/ABS
- Location: Passenger Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83504963Product Specifications- Notes: Station Wagon, Dana 35 Axle, W/ABS
- Location: Driver Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83506005Product Specifications- Notes: 4WD, Full Time Axle, Universal Joint Type, W/ABS
- Location: Passenger Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: 83506006Product Specifications- Notes: 4WD, Full Time Axle, Universal Joint Type, W/ABS
- Location: Driver Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: J8131932Product Specifications- Notes: W/Dana Model 60 Axle, All
- Location: Driver Side; Passenger Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Chief, Laredo, Limited, Pioneer | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: J8132912Product Specifications- Notes: Wagon
- Location: Passenger Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1988 Jeep Cherokee Driveshaft
PartNumber: J8132913Product Specifications- Notes: Wagon
- Location: Driver Side
- Part Description: 1988 Jeep Cherokee Driveshaft
Vehicle Fitment- 1988 Jeep Cherokee | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS