< Back ×
My Vehicle Change Vehicle
1985 Chevrolet S10 Blazer
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 1985 Chevrolet S10 Blazer Shaft Kit, Front Upper Control Arm
PartNumber: 12385857
Product Specifications- Notes: 2WD
- Location: Driver Side; Passenger Side
- Item Dimensions: 4.5 x 4.5 x 17.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Shaft Kit, Front Upper Control Arm
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$51.39 MSRP:$103.65You Save: $52.26 (51%)
OEM (Genuine) 1985 Chevrolet S10 Blazer Axle Asm-Front (3.42 Ratio)
PartNumber: 26029956
Product Specifications- Notes: 4WD
- Other Names: Axle Assembly, Differential Assembly
- Item Dimensions: 27.0 x 18.4 x 13.1 inches
- Item Weight: 81.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Axle Asm-Front (3.42 Ratio)
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Front Wheel Drive Shaft Kit
PartNumber: 26055390
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 26.5 x 6.9 x 7.5 inches
- Item Weight: 21.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26027966, 7844070, 07844070
- Part Description: 1985 Chevrolet S10 Blazer Front Wheel Drive Shaft Kit
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
Cardone Reman® Remanufactured Driveshafts for 1985 Chevrolet S10 Blazer
PartNumber: 65-9358Product Specifications- Notes: with Propshaft Code CAN;with 26" (660 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Greasable: Yes
- Length: 26"
- Length (mm): 660,4
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1985 Chevrolet S10 Blazer Remanufactured Driveshafts
Vehicle Fitment- 1985 Chevrolet S10 Blazer | All Trims | All Engines
OEM (Genuine) 1985 Chevrolet S10 Blazer Rear Axle Shaft
PartNumber: 14035368
Product Specifications- Notes: S-Series; 4WD; W/O 4 Door; 7.50 Dia.; 4WD
- Other Names: Axle Shaft
- Item Dimensions: 29.8 x 6.2 x 6.1 inches
- Item Weight: 16.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Rear Axle Shaft
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Front Drive Axle Clutch Shaft
PartNumber: 26042726
Product Specifications- Notes: 4WD
- Other Names: Axle Shaft, Driven Shaft, Output Shaft
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Front Drive Axle Clutch Shaft
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Propeller Shaft Assembly
PartNumber: 7841484Product Specifications- Notes: S-Series; 4WD; S-Blazer/Jimmy; 2 Door
- Other Names: Drive Shaft
- Item Dimensions: 51.8 x 4.7 x 4.6 inches
- Item Weight: 14.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Propeller Shaft Assembly
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Differential Shaft Assembly
PartNumber: 14041986
Product Specifications- Notes: S-Series; Left; S-Series; 4WD
- Location: Driver Side
- Item Dimensions: 7.9 x 7.5 x 7.7 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Differential Shaft Assembly
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Shaft Kit, Front Drive Axle Inner
PartNumber: 26034185
Product Specifications- Notes: 4WD
- Location: Passenger Side
- Other Names: Axle Shaft, Inner Joint Assembly, Output Shaft
- Item Dimensions: 17.4 x 6.5 x 6.6 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Shaft Kit, Front Drive Axle Inner
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Shaft-Rear Axle
PartNumber: 14030355Product Specifications- Notes: S-Series; 2WD; W/O 4 Door; 7.50 Dia.; 2WD
- Other Names: Axle Shaft
- Item Dimensions: 28.4 x 6.2 x 6.1 inches
- Item Weight: 14.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Shaft-Rear Axle
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Axle Shaft
PartNumber: 7844114
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Outer Joint Assembly, Shaft
- Item Dimensions: 18.4 x 1.8 x 1.8 inches
- Item Weight: 3.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Axle Shaft
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Driveshaft
PartNumber: 14041991Product Specifications- Notes: S-Series; Right
- Part Description: 1985 Chevrolet S10 Blazer Driveshaft
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Driveshaft
PartNumber: 14041997Product Specifications- Notes: S-Series
- Part Description: 1985 Chevrolet S10 Blazer Driveshaft
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, Sport, Tahoe, Tahoe LT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 1985 Chevrolet S10 Blazer Propeller SHAFT
PartNumber: 7841472Product Specifications- Notes: S-Series; 2WD; Manual Trans; S-Blazer/Jimmy; 2 Door
- Other Names: Drive Shaft
- Fitment Type: Direct Replacement
- Part Description: 1985 Chevrolet S10 Blazer Propeller SHAFT
Vehicle Fitment- 1985 Chevrolet S10 Blazer | Base, High Country, LT, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS