< Back ×
My Vehicle Change Vehicle
1984 Ford Ranger
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 1984 Ford Ranger Pinion Gear Shaft
PartNumber: E4SZ-4211-A
Product Specifications- Notes: Bronco Ii, Ranger; 7.5" Ring Gear
- Other Names: Pinion Gear Shaft, Pinion Shaft, Shaft
- Item Dimensions: 6.2 x 1.8 x 1.6 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Ford Ranger Pinion Gear Shaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
$20.75 MSRP:$29.83You Save: $9.08 (31%)OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ3219AProduct Specifications- Notes: Bronco Ii, Ranger; Right
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Splash, Sport, STX, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Cardone Reman® Remanufactured Driveshafts for 1984 Ford Ranger
PartNumber: 65-9830Product Specifications- Notes: with 44-1/4" (1123 mm) Long Driveshaft;Short Wheelbase;Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 44.25"
- Length (mm): 1123
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1984 Ford Ranger Remanufactured Driveshafts
Vehicle Fitment- 1984 Ford Ranger | All Trims | 4 Cyl 2.3L
- 1984 Ford Ranger | All Trims | 6 Cyl 2.8L
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ3220AProduct Specifications- Notes: Bronco Ii, Ranger; Left
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Splash, Sport, STX, XL, XL Sport, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Cardone Reman® Remanufactured Driveshafts for 1984 Ford Ranger
PartNumber: 65-9831Product Specifications- Notes: with 42-5/16" (1074 mm) Long Driveshaft;Short Wheelbase;Measurement is taken from center of U-joint to the end of flange on the opposite side
- Greasable: Yes
- Length: 42.312"
- Length (mm): 1074
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1984 Ford Ranger Remanufactured Driveshafts
Vehicle Fitment- 1984 Ford Ranger | All Trims | 4 Cyl 2.3L
- 1984 Ford Ranger | All Trims | 6 Cyl 2.8L
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ4234AProduct Specifications- Notes: Bronco Ii, Ranger; 6.7" Ring Gear
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ4234BProduct Specifications- Notes: Bronco Ii, Ranger; 7.5" Ring Gear; Right Side
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1984 Ford Ranger Axle
PartNumber: E3TZ-4234-CProduct Specifications- Notes: Bronco Ii, Ranger; 7.5" Ring Gear; Left Side
- Other Names: Axle, Axle Shaft
- Item Dimensions: 40.8 x 8.3 x 8.3 inches
- Item Weight: 8.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1984 Ford Ranger Axle
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ4234DProduct Specifications- Notes: Bronco Ii, Ranger; 8.8" Ring Gear; Right Side
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ4234EProduct Specifications- Notes: Bronco Ii, Ranger; 8.8" Ring Gear; Left Side
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E3TZ4602AVProduct Specifications- Notes: Ranger; 2.0l, 2.3l; 114" Wheelbase;Ranger; 2.8l; 108" Wheelbase
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, S, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E4TZ3006BProduct Specifications- Notes: Bronco Ii, Ranger; Right
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E4TZ3007BProduct Specifications- Notes: Bronco Ii, Ranger; Left
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 4.0 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E4TZ4602KProduct Specifications- Notes: Ranger; 2.0l, 2.3l; 108" Wheelbase
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | S, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E4TZ4A376DProduct Specifications- Notes: Ranger; 2.8l; 114" Wheelbase
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, S, XL, XLS, XLT | 6 Cyl 2.8 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E5TZ4602BProduct Specifications- Notes: Ranger; 2.8l; 114" Wheelbase
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E5TZ4602RProduct Specifications- Notes: Bronco Ii; 2.3l
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, S, STX, XL, XLS, XLT | 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS
OEM (Genuine) 1984 Ford Ranger Driveshaft
PartNumber: E5TZ4A376AProduct Specifications- Notes: Ranger; 2.8l; 108" Wheelbase
- Part Description: 1984 Ford Ranger Driveshaft
Vehicle Fitment- 1984 Ford Ranger | Base, Custom, GT, S, S Plus, Sport, STX, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS